CG24EAS Hitachi - Overview
Models starting with CG24EAS
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Purge Bulb
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$9.80
In Stock
Return Grommet
PartSelect #: PS9995391
Manufacturer #: 6697846
This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grom...
No Longer Available
Pump Filter Body
PartSelect #: PS17016301
Manufacturer #: 66A3864
This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It w...
No Longer Available
Cleaner Element
PartSelect #: PS9992752
Manufacturer #: 6690347
This OEM-made cleaner element, also known as an air filter, helps keep the engine clean by filtering the air that goes inside. It is 1/4 inches in height, 3 1/2 inches in length, 1/2 inches in width, ...
No Longer Available
Spark Plug
PartSelect #: PS9995419
Manufacturer #: 6699322
This is an authentic OEM sourced replacement part commonly utilized on Hitachi and Tanaka handheld lawn and garden equipment. The purpose of a spark plug is to deliver electric current to an internal ...
No Longer Available
Stop Switch
PartSelect #: PS17016742
Manufacturer #: 6601275
Genuine manufacturer approved replacement switch, it is used on Tanaka and Hitachi handheld lawn and garden equipment. It is the part of the unit handling on/off operations. Over time switch may devel...
No Longer Available
Fuel Pipe
PartSelect #: PS12170129
Manufacturer #: 6699014
This is a genuine OEM replacement part designed for Hitachi power equipment. The purpose of fuel line is to to return excess fuel back on the system. By pressing the primmer bulb it will fill the carb...
No Longer Available
Ring-piston
PartSelect #: PS9990180
Manufacturer #: 6684588
This piston ring is a small metal ring in an engine that seals the gap between the piston and the cylinder wall. It prevents the escape of combustion gases and maintains compression. When damaged, oil...
$8.31
Special Order
Metering Diaphragm
PartSelect #: PS9990265
Manufacturer #: 6684690
This part is available as an individual replacement. The metering diaphragm goes between the diaphragm gasket and the diaphragm cover. During replacement, it may require a screwdriver to help install ...
$18.86
In Stock
Recoil Spring
PartSelect #: PS17016741
Manufacturer #: 6684675
This is an original replacement part manufactured for use with outdoor power equipment. The recoil spring is used to provide tension to rewind the starter rope after pulling to start the engine. This ...
No Longer Available
Fuel Line
PartSelect #: PS11911591
Manufacturer #: 6698716
Genuine Hitachi replacement part,this item is sold individually. This Fuel Line is the line that connects to the fuel filter inside the fuel tank. It delivers the fuel to the carburetor by pumping the...
$6.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
-
Richard from SPRING HILL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
17 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!