CCE3401B Jenn-Air Cooktop Parts & Repair Help | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CCE3401B

CCE3401B Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CCE3401B

Sections of the CCE3401B

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(1)
PartSelect #:PS11746840
Manufacturer #:WP90767
This screw is sold individually.
$4.68
In Stock
(5)
PartSelect #:PS2003583
Manufacturer #:12002125
This switch is used to operate the dual surface burner.
$47.81
In Stock
(6)
PartSelect #:PS12070671
Manufacturer #:W11088181
This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner...
$61.31
In Stock
(1)
PartSelect #:PS11757486
Manufacturer #:WPY04100366
This infinite knob is black in color and is two inches in diameter. It is only an inch high and it has a gray indicator dot.
$16.08
In Stock
(1)
PartSelect #:PS11764912
Manufacturer #:W10823704
This element can be used for the left front or right rear.
$121.66
In Stock
PartSelect #:PS11757586
Manufacturer #:WPY706102
$5.50
In Stock
PartSelect #:PS11759487
Manufacturer #:W10823707
$116.09
In Stock
PartSelect #:PS11744050
Manufacturer #:WP74004005
This screw is well under an inch long, and is made of metal.
$4.43
In Stock
(1)
PartSelect #:PS2077869
Manufacturer #:71002556
$431.96
In Stock
PartSelect #:PS11764904
Manufacturer #:W10823694
$115.94
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Outer element of dual element burner didn't work

  • Customer: Michael from Collierville, TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Socket set
  • 124 of 161 people found this instruction helpful
Remove Ceran Galss top by removing hex screws below the rim. Also remove the two opposing screws in the center of the downdraft opening. Ceran top comes off easily now.
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new sw... read more

The repair itself was very easy. “How to connect” was very hard to get.

  • Customer: Igor from Campbell, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 33 of 41 people found this instruction helpful
The repair itself was very easy. “How to connect” was very hard to get.


To get access to the switch, unscrew 2 screws from each side of front panel and then 4 screws from the bottom of it (open the door first). Have a box or a small table about 30” high to use it as support for the front panel.

The end result (colors for the Righ... read more

old switch had shorted and burned out

Surface Burner Switch – Part Number: W11088181
  • Customer: Larry from Hampton Cove, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 32 of 44 people found this instruction helpful
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have been oveer $1000. P... read more