BDNS24L9A Admiral Refrigerator Parts & Repair Help | PartSelect
Models > BDNS24L9A (BN92F)

BDNS24L9A (BN92F) Admiral Refrigerator - Overview

Get Parts and Repair Help for BDNS24L9A

Sections of the BDNS24L9A

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(3)
PartSelect #:PS11731356
Manufacturer #:W10857122
Sold individually. This bulb is a 7-watt appliance incandescent light bulb. This appliance light bulb is two inches long. It is used for many clothes dryers. You will need a Philli...
$6.89
In Stock
(5)
PartSelect #:PS11738609
Manufacturer #:WP12740302
This is the replacement ice maker auger and crusher blade assembly for your refrigerator. It is approximately 15 inches long and 7 inches wide. The ice maker auger sits within the ...
$180.58
In Stock
PartSelect #:PS11743305
Manufacturer #:WP627018
The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...
$7.16
In Stock
PartSelect #:PS11747816
Manufacturer #:WPB5705307
This part supplies water to refrigerator components that require water, such as the ice maker and water dispenser. If you notice a leak coming from your refrigerator, the plastic t...
$5.89
In Stock
(4)
PartSelect #:PS2050940
Manufacturer #:55440-2
This ice and water actuator switch is an inch long. It is black on one side and white on the other. This switch is made of plastic and has two metal prongs extending from its body.
$9.87
In Stock
PartSelect #:PS733946
Manufacturer #:8201513
$4.88
In Stock
PartSelect #:PS2003052
Manufacturer #:12001447
No Longer Available
PartSelect #:PS11738339
Manufacturer #:WP1163283
$4.88
In Stock
PartSelect #:PS2072812
Manufacturer #:68557-1
This is part of the ice door chute and acts as a barrier (insulator) when the chute is not being used. It helps keep the ice cold once the ice cubes are conveyed from the containe...
No Longer Available
PartSelect #:PS2072997
Manufacturer #:68763-1
No Longer Available
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Dispenser had jammed up and become inoperative

  • Customer: James from Robinson, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 40 of 47 people found this instruction helpful
The parts discription was a bit vague and I wasn't sure exactly what I was ordering, but I received everything I needed and it works fine. The combination screw conveyor/ice crusher came in one piece. The ice cube bin is a plastic assembly that snaps apart. I used a wide blade screw driver carefully to facilitate assembly/disassembly. Once you have it ap... read more

the ice/water actuator switch burnt out and was stuck on.

  • Customer: Jon from Nampa, ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 13 people found this instruction helpful
Removed the rubber cover over the actuator switch. Used a screwdriver to remove the switch, disconnected the wires. I then removed the switch from the mounting bracket using a small philips head screw driver. Installed the new switch on the mounting bracket then installed the switch onto the freezer door. The only difficult part was installing the rubbe... read more

The icemaker assebly would go off track

  • Customer: Donna from The Villages, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 7 of 7 people found this instruction helpful
I removed the front cover--just popped off with no trouble. Removed 2 screws at the bottom. Slid the broken part out and put the new one in place. Put in the two screws, replaced the fron cover AND Done!!!
BTW I am a 65 year old woman and the icemaker is like new. read more