Models > BBRE1065H0WW

BBRE1065H0WW General Electric Washer - Overview

Sections of the BBRE1065H0WW

[Viewing 4 of 4]
CABINET PARTS Diagram and Parts List for General Electric Washer
CABINET PARTS
CONTROLS & COVER Diagram and Parts List for General Electric Washer
CONTROLS & COVER
MOTOR & DRIVE COMPONENTS Diagram and Parts List for General Electric Washer
MOTOR & DRIVE COMPONENTS
TUB & BASKET Diagram and Parts List for General Electric Washer
TUB & BASKET
Keep searches simple, eg. "belt" or "pump".
Split Ring – Part Number: WH02X10265
Split Ring
★★★★★
★★★★★
(8)
PartSelect #: PS1766022
Manufacturer #: WH02X10265
This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T...
$14.41
  In Stock
Hub Nut – Part Number: WH01X10618
Hub Nut
★★★★★
★★★★★
(1)
PartSelect #: PS3501416
Manufacturer #: WH01X10618
This hub nut is a genuine OEM replacement part for your stackable washing machine. Removing the hub nut may require a spanner wrench, as per the manufacturer specifications. Replacing this part requir...
$11.64
  In Stock
Hose Clamp Kit – Part Number: WH1X2036
Hose Clamp Kit
★★★★★
★★★★★
(2)
PartSelect #: PS270806
Manufacturer #: WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in ...
$15.89
  In Stock
WASHER HUB – Part Number: WH01X10617
WASHER HUB
★★★★★
★★★★★
(1)
PartSelect #: PS3501415
Manufacturer #: WH01X10617
$13.91
  In Stock
Screw – Part Number: WH02X10001
Screw
PartSelect #: PS268949
Manufacturer #: WH02X10001
This screw is sold individually. Size: 14-10 a trt 7/8 s.
$8.06
  In Stock
Wire Form Hinge - Long – Part Number: WH1X2743
Wire Form Hinge - Long
PartSelect #: PS271113
Manufacturer #: WH1X2743
  No Longer Available
TRANSMISSION PULLEY – Part Number: WH38X10018
TRANSMISSION PULLEY
PartSelect #: PS3496872
Manufacturer #: WH38X10018
$17.87
  In Stock
SHIFTER HUB – Part Number: WH01X28559
SHIFTER HUB
PartSelect #: PS12723079
Manufacturer #: WH01X28559
$14.10
  In Stock
SUPPORT SENSOR BOARD – Part Number: WH12X10514
SUPPORT SENSOR BOARD
PartSelect #: PS3501435
Manufacturer #: WH12X10514
$8.06
  In Stock
PRESSURE SWITCH – Part Number: 228C2084P010
PRESSURE SWITCH
PartSelect #: PS3654136
Manufacturer #: 228C2084P010
  No Longer Available
BACKSPLASH- HEAT TRANSFE – Part Number: 189D3497G009
BACKSPLASH- HEAT TRANSFE
PartSelect #: PS3496744
Manufacturer #: 189D3497G009
  No Longer Available
LID LOCK Assembly – Part Number: 228C2107P004
LID LOCK Assembly
PartSelect #: PS3506735
Manufacturer #: 228C2107P004
  No Longer Available
View More
Back to Top

Questions And Answers for BBRE1065H0WW

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the BBRE1065H0WW

[Viewing 2 of 2]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Split Ring

Replacing the Split Ring

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tub seal leaking, grinding noise on spin.
Purchased spanner wrench for tub nut wouldn’t budge, impacted off. Then spin tub took 2days to get loose, lots of WD40 , also heated up center area, used a small sledgehammer head to hit a socket on the large part of the shaft . Had to take out outer tub to replace seal and support bearing unit.
Parts Used:
Hub Nut
  • Lee from GRANDVILLE, MI
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top