AKS3020L-P1142517NL Amana Cooktop - Overview
Sections of the AKS3020L-P1142517NL
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Top Burner Knob - black
PartSelect #: PS11740886
Manufacturer #: WP31905407B
This top burner knob is two and a half inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions....
$26.82
In Stock
Burner Cap - Matte Black
PartSelect #: PS2033512
Manufacturer #: 31782601MB
The size of this burner cap is actually 2.5" to 2.75 inches in diameter.
No Longer Available
Valve Screw
PartSelect #: PS3651486
Manufacturer #: W10491986
Part might differ in appearance, but functions same as original. Sold individually.
No Longer Available
Top Burner Valve
PartSelect #: PS2033842
Manufacturer #: 31891901
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
No Longer Available
Questions And Answers for AKS3020L-P1142517NL
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
New range knobs were needed.
Ordering the new range knobs was very easy with Parts Select. I thought they might not still be in stock due to the age of the appliance, but with the easy to navigate web site, no problem. Thanks!
Parts Used:
-
Madelyn from Park City, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas Valve wouldn't turn
Replacing the valve was straight forward. Getting to it was another matter. 3 of the 8 screws holding the burner bases down to the mounting brackets were rusted out (phillips head slots rounded off)and had to be drilled out usually snapping in the process. After the stove top was lifted off, what remained of the screws was easily remove
... Read more
d using vice grips. Mounting brackets were also getting rusted and I'll need to replace them in a few years.
Read less
Parts Used:
-
Ken from Torrance, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!