Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 98-1348-00-02

98-1348-00-02 Tappan Freezer - Overview

Get Parts and Repair Help for 98-1348-00-02

If you know the freezer repair part you need, you can browse the list of all parts on the 98-1348-00-02, or you can search by name or part description. You can also find your part by where it is located on the 98-1348-00-02 by selecting a section below. We’ve also included any installation videos we have for 98-1348-00-02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 98-1348-00-02

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.46

KEY

This freezer door key is designed for use with most upright and chest freezers. It is an authentic OEM replacement part. Your appliance has a lid or door that locks and unlocks, th...

$7.82

Single Gasket Retainer Clip

This genuine OEM freezer gasket retainer clip is used on refrigerator freezers, and connects the inner door panel and door gasket to the outer door panel. The gasket is the rubbery strip that seals the space around the edge of the door to keep warm air out of the freezer. When the gasket is not working properly, you may notice an excessive frost buildup or reduced cooling. If the gasket is hanging loosely from the door, the issue could be with the retainer, or the clip fastening the retainer to the gasket, and it should be replaced.

$0.60

Levelling Leg

Sold individually.

$5.58

SCREW

Sold Individually.

$8.97

Shelf Support - Left Side

This is a shelf support for the left side of a freezer. It is used to help support the inside of the shelf from both sides. *Please note: right and left side of shelf support are s...

$9.05

Shelf Support

This is a shelf support for freezers. It is used to help hold the inside of the shelf from both sides (left and right.) Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is not leveled and is unstable, changing this part could be the solution. Make sure to unplug the refrigerator from the power source before beginning this replacement project and safely store your food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.

$9.42

Filter - Drier

A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical f...

$8.57

SUPPORT-REAR SHELF

This part is found in freezers. The stud may have broken over time and may no longer be supporting the shelf. If your shelf is not staying in place or you are not able to adjust heights, it may be due to the support being broken. To complete this repair, you will need to open the fridge and remove the drawer and the shelf. To remove the old stud, you will need a 3/4-inch wrench to twist it off. The new part should push into place and will need to be turned with your wrench to be secured into place.

$94.12

Relay

$67.65

INSULATION

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replacement freezer keys

  • Parts Used:
  • KEY
  • Customer: CHARLOTTE from SEDALIA, MO
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 38 of 42 people found this instruction helpful
I accidently threw away both freezer keys to our upright Gibson and G.E. Freezers!!!! I had no luck finding replacements locally, so I got on the internet and came across PartSelect.com. I called them on the telephone; and after giving the model numbers of my freezers, the keys were on their way!! I received the keys very quickly and both worked perfectly. ... read more

The freezer door wouldn't stay shut due to two irresponsible children.

  • Parts Used:
  • KEY
  • Customer: Paul from Cape Coral, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 13 people found this instruction helpful
We ordered the part, which was a key, tied it on the freezer door handle, locked the door and voila, the problem was fixed. (We still have the children. :-) read more

One end cap on freezer door broke.

  • Customer: judy from louisville, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 14 people found this instruction helpful
First removed the remaining end cap; then inserted rod into RH and LH replacement caps and snapped end caps into place. read more