97A-4CX Magic Chef Range - Overview
Sections of the 97A-4CX
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Clock Knob
PartSelect #: PS11744673
Manufacturer #: WP7711P466-60
This clock knob is just under an inch long. It is black in color and is made of plastic. There is a chrome disc of decoration on its top.
No Longer Available
Door Seal - Top
PartSelect #: PS11743943
Manufacturer #: WP7212P006-60
This oven door seal creates a protective seal around an oven door to prevent heat from running out of a closed oven and keeps room air from entering the oven. This part is 17.5 inches long and made o...
$62.60
Special Order
Bake Element (16" long x 16" wide)
PartSelect #: PS11744510
Manufacturer #: WP7406P012-60
This spade style bake element is 16 inches long and 16 inches wide. The depth of the terminals is two inches. Use it for your Maytag brand electric range or oven.
$78.70
In Stock
Range Vertical Side Door Seal
PartSelect #: PS11743944
Manufacturer #: WP7212P007-60
$57.27
Special Order
Questions And Answers for 97A-4CX
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 97A-4CX
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
heat element wouldn't heat after 30 years of cooking
Pulled screws loose from element, pulled old element out and replaced with new..really simple
Parts Used:
-
Mary from Salisbury, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
11 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower element in oven not heating.
Removed, tested and measured the old element. Got on line to find the part and ran across Part Select. Ordered and received the part in three business days. It was an exact fit and in good order. The total operation including removal and replacement of the element, locating and ordering the part only took about thirty minutes.....and that
... Read more
includes the ten minutes it took me to find my #2 Phillips screwdriver! : )
Read less
Parts Used:
-
tom from cincinnati, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned up oven door gasket needed replaced.
I started by removing the door, then trying to remove all of the screws in the oven casing. Of course the very middle screw in the bottom of the oven was rusted and dammged by use. I had to use a drill bit and remove the old screw. After dissasembly of the oven casing, I found that the lip that supports the gasket was rusted and burnt awa
... Read more
y about 3/4 in. I placed the new gasket in and found that when closed it covered this defect and sealed. I reassembled and cheked for operation.Ok! Imortant--remove the elements before removing oven casing.
Read less
Parts Used:
-
Daniel from Prescott, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
7 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!