954076401A Husqvarna Lawn Mower - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Front drive wheel locked up, causing the mower to not be able to be pushed.
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Parts Used:
-
Walter from EVERETT, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Parts Used:
-
Joel from ROSEVILLE, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!