952802268 Husqvarna Chainsaw - Overview
Sections of the 952802268
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Engine Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this esse...
$9.62
In Stock
Purge Line
PartSelect #: PS9008180
Manufacturer #: 530069216
This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the car...
$17.55
In Stock
Nut
PartSelect #: PS9004113
Manufacturer #: 530015917
The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.
$6.72
In Stock
PIN, BAR ADJUSTING
PartSelect #: PS9289242
Manufacturer #: 545060502
It is an authentic manufacturer-sourced part which is specially made for Poulan and Husqvarna chainsaws. The part is utilized on a chainsaw to to adjust the blade to the correct tension. A correctly a...
$6.72
In Stock
Chain Catcher
PartSelect #: PS9004067
Manufacturer #: 530029850
This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an important safety feature because it prevents the chainsaw chain from flying off the bar if it ...
$9.62
In Stock
Adjust Pin-Bar 36/41
PartSelect #: PS9003373
Manufacturer #: 530015826
This Bar Pin Adjuster is an OEM part used to adjust the tension on the bar, which loosens or tightens the chain. It attaches to the slot in the bar, and the chainsaw bar adjusting screw. Installation ...
$7.65
In Stock
Recoil Starter Repair Kit
PartSelect #: PS9005221
Manufacturer #: 530071966
This is an authentic OEM part for use with Craftsman Chainsaws. The recoil starter repair kit replaces the parts of the engine\\\'s recoil starter susceptible to normal wear. The most common reason fo...
$26.35
In Stock
Clutch Drum
PartSelect #: PS9007596
Manufacturer #: 530047061
This is a genuine OEM sourced component which is specially made for Poulan and Husqvarna chainsaws. The are two functions of the clutch drum assembly. It encases the clutch and when the engine gets up...
$26.35
In Stock
Nut, Carb
PartSelect #: PS9003727
Manufacturer #: 530016101
This is an authentic replacement part supplied from Poulan. It is generally used with gas powered chainsaws. This nut in conjunction with a bolt (sold separately) helps to secure air filter and carbur...
$6.95
In Stock
Bar Adjustment Retainer
PartSelect #: PS9007262
Manufacturer #: 530038593
This OEM bar adjustment retainer is a metal component that securely holds the adjustment screw and pin in place, allowing you to adjust the chain tension. It is typically located near the front of the...
$6.72
In Stock
Srew M5.38-14x22.225mm
PartSelect #: PS9003610
Manufacturer #: 530016432
This is a genuine manufacturer approved replacement part designed for use with chainsaws. It is a standard hardware which has multiple applications based on your equipment. Please refer to diagrams of...
$6.72
In Stock
Screw Catcher
PartSelect #: PS9362595
Manufacturer #: 530015814
This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams f...
$5.95
In Stock
Common Symptoms of the 952802268
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The metal band that tightens on the "flywheel" had broken.
I looked at just buying the metal band for about $5. But I noted it would have required having to compress a spring in a very small area. Since my saw is over 5 years old I figured I might as well get the whole chain brake assembly which includes the cover, and all the guts that are in that cover. This included the metal band and the s
... Read more
pring already installed. I think my time is worth something and not being frustrated with getting all the parts back in place was worth the extra $15. As far as the actual work this is how it went. Remove two large nuts on side of saw. Remove damaged cover. Put on new cover. Tighten 2 nuts. Adjust tension of chain. Only trick would be to check that the chain brake lever is not in the forward position (where it would stop the chain from turning). It should be in the back position (towards the top handle) to put back on the cover. Love this saw by the way for cutting small trees for firewood.
Read less
Parts Used:
-
Heidi from Lincoln, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced pin bar adjuster
A very simple fix once I rec'd the part. Took old broken part off bolt and screwed new one on. Great to get saw back in ready for use status.
Parts Used:
-
Timothy from TRYON, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!