Models > 917374441

917374441 Craftsman Lawn Mower - Overview

Sections of the 917374441

[Viewing 1 of 1]
Diagram and Parts List for Craftsman Lawn Mower
Keep searches simple, eg. "belt" or "pump".
Wheel – Part Number: 532401274
Wheel
★★★★★
★★★★★
(1)
PartSelect #: PS9016096
Manufacturer #: 532401274
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part.
$34.86
  In Stock
Blade, 22" – Part Number: 532406713
Blade, 22"
PartSelect #: PS9017810
Manufacturer #: 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22...
$15.90
  In Stock
Cover, Dust, Wheel – Part Number: 581840401
Cover, Dust, Wheel
★★★★★
★★★★★
(3)
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
  In Stock
Handle Knob – Part Number: 532185577
Handle Knob
PartSelect #: PS9020379
Manufacturer #: 532185577
$3.99
  In Stock
Pinion – Part Number: 532403849
Pinion
PartSelect #: PS9016131
Manufacturer #: 532403849
$6.21
  In Stock
E-Ring 7/16 – Part Number: 812000058
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
  In Stock
Hardened Washer – Part Number: 532851074
Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
  In Stock
Drive Control Cable – Part Number: 532194653
Drive Control Cable
★★★★★
★★★★★
(1)
PartSelect #: PS9016384
Manufacturer #: 532194653
$27.40
  In Stock
Battery Charger 12V – Part Number: 597186301
Battery Charger 12V
PartSelect #: PS17016527
Manufacturer #: 597186301
Battery Charger 12V
$38.60
  In Stock
Hex Head Screw 3/8-24x1-3/8 Gr. 8 – Part Number: 532851084
Hex Head Screw 3/8-24x1-3/8 Gr. 8
PartSelect #: PS9026163
Manufacturer #: 532851084
$4.99
  In Stock
Spring – Part Number: 532193000
Spring
PartSelect #: PS9016049
Manufacturer #: 532193000
$7.46
  In Stock
Locknut, Hex 1/4-20 – Part Number: 873680400
Locknut, Hex 1/4-20
PartSelect #: PS9308352
Manufacturer #: 873680400
This manufacturer-approved 1/4 Hex Nut can be installed using a wrench or socket, and is used to secure parts in place. Refer to your make, model number and diagrams to ensure this is the right part for you.
  No Longer Available
View More
Back to Top

Questions And Answers for 917374441

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 917374441

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Read less
Parts Used:
Wheel
  • Russ from ALTENBURG, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive cable broken
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
Parts Used:
Drive Control Cable
  • Frank from AUSTIN, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top