867777841 Kenmore Furnace - Overview
Sections of the 867777841
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Washer Screen
PartSelect #: PS11746894
Manufacturer #: WP96160
Found on the water inlet valve.
$11.50
In Stock
Impeller with Motor Shaft Seal
PartSelect #: PS11743041
Manufacturer #: WP6-904027
This impeller rotates and is used to force water up through to the spray arm.
No Longer Available
Detergent Cup Repair Kit
PartSelect #: PS2096992
Manufacturer #: 901011
This kit allows the detergent cup cover to clip into place and then snap open when the bi-metal receives the correct signal from the dishwasher, releasing detergent into the dishwasher.
No Longer Available
Freezer Door Gasket (measures 28-1/2" by 18-1/2")
PartSelect #: PS11743831
Manufacturer #: WP70047-2
This white freezer door gasket measures approximately 28-1/2 inches by 18-1/2 inches. It is used on many freezer doors of top mount model Maytag brand refrigerators that have been manufactured since 1980.
No Longer Available
PUMP-WATER
PartSelect #: PS347734
Manufacturer #: 350367
IF FAILED PUMP IS DIE
CAST, O
No Longer Available
Questions And Answers for 867777841
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 867777841
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
leak through impeller seal.
removed spray head, pulled motor/pump assembly. took apart impeller housing and then removed motor and pulled impeller off its shaft, the most difficult part was actually pulling off impeller from the splined shaft. I actually broke old impeller in the process. The good thing is that the new seal came assembled with new impeller so th
... Read more
at was not a problem. After re-assembling everything it worked fine and still works for a week since repair.
Read less
Parts Used:
-
Maxim from Ashburn, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The detergent cup would not latch closed
The repair was fairly simple. The hardest part was figuring out if this was the part I needed or not. After studying the inerds of the dishwasher door and the detergent cup mechanism, it seemed like this part would do the trick.
Here's how the mechanism works . . . the plastic stopper at the end of the bi-metallic strip lat ... Read more ches the detergent cup in place. If these strips are bent away from the spring mechanism / plastic cam enough, the stopper will not latch on the cam (as was the case with mine). So, I needed to replace the bi-metallic strip. This part comes along with a new cam and spring.
The actual replacement of the parts is simple. The parts come with pretty good installation instructions.
Good luck . . .
Here's how the mechanism works . . . the plastic stopper at the end of the bi-metallic strip lat ... Read more ches the detergent cup in place. If these strips are bent away from the spring mechanism / plastic cam enough, the stopper will not latch on the cam (as was the case with mine). So, I needed to replace the bi-metallic strip. This part comes along with a new cam and spring.
The actual replacement of the parts is simple. The parts come with pretty good installation instructions.
Good luck . . .
Read less
Parts Used:
-
ryan from topeka, KS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking around pump motor shaft seal
Disassembled my dishwasher and found the rubber on the impeller seal had deteriorated causing the leak. If this is all that is wrong with your unit, it is well worth the repair attempt. Find the service manual pdf on servicematters (dot) com for detailed instructions on removing and re-installing the part. The only thing I have to add is
... Read more
the on my first try installing the part, I still had a leak. I may have just had the motor/impeller slightly mis-aligned (the water tight seal is actually the carbon disk on the impeller rubbing against the carbon disk on the seal seat in the pump housing). On the second attempt I used silicone to glue the 'seal seat' into the pump housing (carbon side out). After waiting a day for the silicone to dry, the dishwasher ran without leaking. It continues to be leak free several weeks later.
Read less
Parts Used:
-
Michael from Belleville, IL
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench set
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!