867740720 Kenmore Heater - Overview
Sections of the 867740720
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Lower Dishrack
PartSelect #: PS2099930
Manufacturer #: 99002572
UPDATE: As per Manufacturer - this rack is just the bare dishrack. Nothing included - must order wheels, fold-away tine latches and fold-away tine clips separately. These extra parts are NOT included with the rack.
No Longer Available
Solid Surface Burner - 6 Inch
PartSelect #: PS11740766
Manufacturer #: WP3147131
Sold individually.
$125.68
Special Order
Questions And Answers for 867740720
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 867740720
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
not draining at end of cycle
First I dismantled the impellers that drive the wash and drain water to see if they were damaged or clogged - I knew the drain hose was not clogged. It seems you can' remove the wash impeller without breaking it..... at least I couldn't.
Since they were ok [i replaced the wash impeller that I broke], it seemed the only other thing ... Read more could be the timer switch. I replaced it and all was fine again. It replaces by removing the plastic INSIDE panel of the door and quite easily after that.
Since they were ok [i replaced the wash impeller that I broke], it seemed the only other thing ... Read more could be the timer switch. I replaced it and all was fine again. It replaces by removing the plastic INSIDE panel of the door and quite easily after that.
Read less
Parts Used:
-
Michael from Chevy Chase, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusty lower dishrack
Ordered lower dishrack PS2099930 (FSP 99002572). My old rack had permanent tines in 3 quadrants & foldaway tines in right rear. New rack (which came w/wheels) had permanent tines only in front 2 quadrants, plus 2 loose long tine rows (later ID'd as PS2099527, Front Fold-Away Tine, and PS2099528, Rear Fold-Away Tine). Ordered PS2097246 (Re
... Read more
ar Rack Bowl Tine Row) to replace my existing rusty tines, but "on order" really meant "not available anywhere." Watched installation video for PS2099037 (Fold Away Tine Clip) which clearly matches the loose tine rows that came with rack, but was problematic since my center spindle is permanently mounted on floor of cabinet, not on the rack. Fold-Away Tines could be cut off, but they would start rusting immediately. Ordered 4 PS343939 (Tine Row for upper dishrack) and 4 PS2099037 (FSP 99001436 Fold Away Tine Clip), hoping that these tine rows would clear the spindle. They work ok, but do graze the spindle slightly. Undecided whether I will tolerate the consequent floppiness of the tines, or permanently lock into place using nylon cable ties. Actual installation easy, with no extra tools, once I acquired parts that fit.
Read less
Parts Used:
-
David from ANN ARBOR, MI
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replaced rusting lower dishwasher rack
The only difficulty with installing the new lower dishrack was that the back tines came as 2 separate pieces with no instructions or clips. We ended up using white zip tipes to attach the pieces.
Parts Used:
-
Nancy from Springfield, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!