EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

8677365102 Kenmore Furnace - Overview

Sections of the 8677365102

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SWITCH- TE – Part Number: 40046601
SWITCH- TE
PartSelect #: PS2040943
Manufacturer #: 40046601
  No Longer Available
Muffler, Hoz – Part Number: 7046445YP
Muffler, Hoz
PartSelect #: PS11832181
Manufacturer #: 7046445YP
$141.76
  Special Order
Assy, wiring harness – Part Number: 503905
Assy, wiring harness
PartSelect #: PS12650596
Manufacturer #: 503905
  No Longer Available
WELD, LIFT ARM ASSEMBLY, – Part Number: 7046958YP
WELD, LIFT ARM ASSEMBLY,
PartSelect #: PS18607149
Manufacturer #: 7046958YP
$70.77
  Special Order
Gasket & Seal – Part Number: STD541006
Gasket & Seal
PartSelect #: PS12675248
Manufacturer #: STD541006
Washer
  No Longer Available
*NLA*PANEL,GRAPHIC – Part Number: 500757
*NLA*PANEL,GRAPHIC
PartSelect #: PS17173041
Manufacturer #: 500757
  No Longer Available
Refrigerator roller – Part Number: 502202
Refrigerator roller
PartSelect #: PS12293330
Manufacturer #: 502202
  No Longer Available
Orifice,lp – Part Number: 504092
Orifice,lp
PartSelect #: PS12618387
Manufacturer #: 504092
  No Longer Available
Instructions,operati – Part Number: 502527
Instructions,operati
PartSelect #: PS12618065
Manufacturer #: 502527
  No Longer Available
SWITCH, LIGHT – Part Number: 548221
SWITCH, LIGHT
PartSelect #: PS379163
Manufacturer #: 548221
  No Longer Available
Switch, pressure-3 p – Part Number: 38619
Switch, pressure-3 p
PartSelect #: PS12629525
Manufacturer #: 38619
$43.21
  Special Order
N BOLT-10-24X3 – Part Number: STD511003
N BOLT-10-24X3
PartSelect #: PS221215
Manufacturer #: STD511003
  No Longer Available

Questions And Answers for 8677365102

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No warm Water on rinse
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the lugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Parts Used:
SWITCH- TE
  • Terry E. from Johnstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!