EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

867736470 Kenmore Furnace - Overview

Sections of the 867736470

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SWITCH- TE – Part Number: 40046601
SWITCH- TE
PartSelect #: PS2040943
Manufacturer #: 40046601
  No Longer Available
Assy, wiring harness – Part Number: 503905
Assy, wiring harness
PartSelect #: PS12650596
Manufacturer #: 503905
  No Longer Available
Label, instr for use – Part Number: 500370
Label, instr for use
PartSelect #: PS12631447
Manufacturer #: 500370
  No Longer Available
WELD, LIFT ARM ASSEMBLY, – Part Number: 7046958YP
WELD, LIFT ARM ASSEMBLY,
PartSelect #: PS18607149
Manufacturer #: 7046958YP
$70.77
  Special Order
***crate,tube-amana – Part Number: 39543
***crate,tube-amana
PartSelect #: PS12624898
Manufacturer #: 39543
  No Longer Available
Manual, instal/op-ze – Part Number: 504165
Manual, instal/op-ze
PartSelect #: PS12626569
Manufacturer #: 504165
  No Longer Available
Pipe cap – Part Number: 47193
Pipe cap
PartSelect #: PS12606412
Manufacturer #: 47193
$7.68
  Special Order

Questions And Answers for 867736470

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No warm Water on rinse
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the lugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Parts Used:
SWITCH- TE
  • Terry E. from Johnstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!