EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

8677363001 Kenmore Furnace - Overview

Sections of the 8677363001

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SWITCH- TE – Part Number: 40046601
SWITCH- TE
PartSelect #: PS2040943
Manufacturer #: 40046601
  No Longer Available
Switch, pressure-3 p – Part Number: 38619
Switch, pressure-3 p
PartSelect #: PS12629525
Manufacturer #: 38619
$43.21
  Special Order
N WASHER-LOCK – Part Number: STD551210
N WASHER-LOCK
PartSelect #: PS221216
Manufacturer #: STD551210
  No Longer Available
Deluxe 14" flo – Part Number: 39632
Deluxe 14" flo
PartSelect #: PS12648186
Manufacturer #: 39632
  No Longer Available
Thermocouple – Part Number: Q340A1074
Thermocouple
PartSelect #: PS12688681
Manufacturer #: Q340A1074
Thermocouple, 24 inches
  No Longer Available
Weld pivot – Part Number: 7047807YP
Weld pivot
PartSelect #: PS12682022
Manufacturer #: 7047807YP
$93.03
  Special Order
U-SHAPED SPEED NUT (2 REQUIRED FOR KEY 183) – Part Number: 24345
U-SHAPED SPEED NUT (2 REQUIRED FOR KEY 183)
PartSelect #: PS673539
Manufacturer #: 24345
  No Longer Available

Questions And Answers for 8677363001

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No warm Water on rinse
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the lugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Parts Used:
SWITCH- TE
  • Terry E. from Johnstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!