EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

867734712 Kenmore Furnace - Overview

Sections of the 867734712

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SWITCH- TE – Part Number: 40046601
SWITCH- TE
PartSelect #: PS2040943
Manufacturer #: 40046601
  No Longer Available
MOUNT- MOT – Part Number: 503613
MOUNT- MOT
PartSelect #: PS1610579
Manufacturer #: 503613
  No Longer Available
Label,venting notice – Part Number: 502790
Label,venting notice
PartSelect #: PS12607758
Manufacturer #: 502790
  No Longer Available
WASHER, NO.10 LOCK – Part Number: 121801
WASHER, NO.10 LOCK
PartSelect #: PS320311
Manufacturer #: 121801
  No Longer Available
Housing * – Part Number: 48205
Housing *
PartSelect #: PS12649485
Manufacturer #: 48205
  No Longer Available
Thermocouple – Part Number: Q340A1074
Thermocouple
PartSelect #: PS12688681
Manufacturer #: Q340A1074
Thermocouple, 24 inches
  No Longer Available
Weld pivot – Part Number: 7047807YP
Weld pivot
PartSelect #: PS12682022
Manufacturer #: 7047807YP
$93.03
  Special Order
Pipe cap – Part Number: 47193
Pipe cap
PartSelect #: PS12606412
Manufacturer #: 47193
$7.68
  Special Order
***crate,tube-amana – Part Number: 39543
***crate,tube-amana
PartSelect #: PS12624898
Manufacturer #: 39543
  No Longer Available
Accssry-600 drawbar – Part Number: 85535
Accssry-600 drawbar
PartSelect #: PS12701766
Manufacturer #: 85535
  No Longer Available

Questions And Answers for 867734712

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No warm Water on rinse
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the lugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Parts Used:
SWITCH- TE
  • Terry E. from Johnstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!