EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

867734250 Kenmore Furnace - Overview

Sections of the 867734250

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SWITCH- TE – Part Number: 40046601
SWITCH- TE
PartSelect #: PS2040943
Manufacturer #: 40046601
  No Longer Available
Label, instr for use – Part Number: 500370
Label, instr for use
PartSelect #: PS12631447
Manufacturer #: 500370
  No Longer Available
Gasket & Seal – Part Number: STD541006
Gasket & Seal
PartSelect #: PS12675248
Manufacturer #: STD541006
Washer
  No Longer Available
Post, crate corner ( – Part Number: 504762
Post, crate corner (
PartSelect #: PS12608287
Manufacturer #: 504762
  No Longer Available
DISCONTINUED – Part Number: STD510602
DISCONTINUED
PartSelect #: PS221213
Manufacturer #: STD510602
  No Longer Available
N BOLT-10-24X3 – Part Number: STD511003
N BOLT-10-24X3
PartSelect #: PS221215
Manufacturer #: STD511003
  No Longer Available
N WASHER-LOCK – Part Number: STD551210
N WASHER-LOCK
PartSelect #: PS221216
Manufacturer #: STD551210
  No Longer Available
Deluxe 14" flo – Part Number: 39632
Deluxe 14" flo
PartSelect #: PS12648186
Manufacturer #: 39632
  No Longer Available
Assy, wire harness – Part Number: 504730
Assy, wire harness
PartSelect #: PS12657095
Manufacturer #: 504730
  No Longer Available
Wheel hub – Part Number: 705469
Wheel hub
PartSelect #: PS12670589
Manufacturer #: 705469
  No Longer Available
DISCONTINUED – Part Number: 819465
DISCONTINUED
PartSelect #: PS886324
Manufacturer #: 819465
  No Longer Available
U-SHAPED SPEED NUT (2 REQUIRED FOR KEY 183) – Part Number: 24345
U-SHAPED SPEED NUT (2 REQUIRED FOR KEY 183)
PartSelect #: PS673539
Manufacturer #: 24345
  No Longer Available

Questions And Answers for 867734250

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No warm Water on rinse
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the lugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Parts Used:
SWITCH- TE
  • Terry E. from Johnstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!