EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > 780000 > Instructions

780000 Snapper - Instructions

All Instructions for the 780000
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace worn PLASTIC discharge chute linkage gears
start with chute auger and punch out roll pins and cotter pin, reassemble linkage with METAL universal gears
Parts Used:
Gear Universal
  • James from PLAISTOW, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scraper Bar was very easy to replace.
Remove the old bar by removing 5 bolts/nuts with 7/16" socket/ratchet.
Reinstall new blade with 5 new nuts/bolts that were provided in the scraper bar replacement kit.
Parts Used:
SCRAPPER BAR KIT 24
  • Jeffery from COON RAPIDS, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher control panel cracked when opening the dishwasher door
First I watched the Parts Select video (Dishwasher Control Panel (Part #00475255 - How to replace) on YouTube just to be sure I could do the replacement. I ordered the part (delivered next day) and replaced the control panel in less than 30 minutes while watching the video. One note, you should be prepared to have a small stool or box to set the electrical components on while swapping the buttons on the control panel. I did not want to leave them hanging by the wires and this is not shown on the video.
Parts Used:
DISC, Friction with Insert
  • Freeland from KENNEBUNKPORT, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Murray schematic for this machine is incorrect and does not refernce replacement
Has not been repaired due to actual OEM replacement part discontinued. Still trying to resolve adaptation of a similar part if/when found on other B&S engine machines

Ref: 424919 Power engage cable
Parts Used:
Cable, Control, Zone
  • ARTHUR J from JOHNSON CITY, TN
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 780000
1 - 6 of 6