Models > 66513633100

66513633100 Kenmore Trash Compactor - Overview

Sections of the 66513633100

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
15 Inch Compactor Bags - 15 Pack – Part Number: W10165295RP
15 Inch Compactor Bags - 15 Pack
★★★★★
★★★★★
(3)
PartSelect #: PS1964579
Manufacturer #: W10165295RP
Trash compactor bags are a practical way to discard your waste. Due to the extreme pressure of the compactor, trash compactor bags designed to handle the force are necessary. These bags are made from ...
$28.68
  In Stock
Off-Switch Actuator Kit – Part Number: W10342596
Off-Switch Actuator Kit
★★★★★
★★★★★
(6)
PartSelect #: PS3489806
Manufacturer #: W10342596
This kit contains everything you will need to replace your faulty off-switch actuator, including: normally closed switch, toe guard, template, 2 screws, and actuator. If your trash compactor keeps run...
$75.04
  In Stock
Drive Gear Kit – Part Number: 882699
Drive Gear Kit
★★★★★
★★★★★
(45)
PartSelect #: PS398589
Manufacturer #: 882699
This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop...
$61.26
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.76
  In Stock
Foot, Front - Single – Part Number: WPW10001130
Foot, Front - Single
★★★★★
★★★★★
(2)
PartSelect #: PS11747965
Manufacturer #: WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is imp...
$7.48
  In Stock
15" Compactor Bag Carrier with Easy Grip Handles – Part Number: 13030RP
15" Compactor Bag Carrier with Easy Grip Handles
★★★★★
★★★★★
(10)
PartSelect #: PS1782408
Manufacturer #: 13030RP
This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place the reusable bag carri...
$34.68
  On Order
Directional Switch – Part Number: WP777811
Directional Switch
★★★★★
★★★★★
(15)
PartSelect #: PS11744742
Manufacturer #: WP777811
The function of the directional switch on your trash compactor is to ensure the ram lowers to compress your trash, then returns to the top position. If your trash compactor does not complete this task...
$63.77
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.44
  In Stock
15 Inch White Plastic Compactor Bags - 60 Pack – Part Number: W10165294RB
15 Inch White Plastic Compactor Bags - 60 Pack
★★★★★
★★★★★
(2)
PartSelect #: PS1964577
Manufacturer #: W10165294RB
This is a 60-pack of plastic compactor bags. These bags are 15 inches wide, 3 millimeters thick and are white in color. The 3-millimeter thickness makes the bags more durable and helps prevent tearing...
$66.92
  In Stock
Foot Pedal – Part Number: 882657
Foot Pedal
★★★★★
★★★★★
(7)
PartSelect #: PS398581
Manufacturer #: 882657
This replacement part is a foot pedal which fits on a trash compactor. It includes two screws for installation. The pedal mounts on the footplate on the bottom front of the container. The pedal contro...
$60.29
  In Stock
Drawer Roller – Part Number: WP9871602
Drawer Roller
★★★★★
★★★★★
(6)
PartSelect #: PS11747573
Manufacturer #: WP9871602
This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your tras...
$15.84
  In Stock
Single Metallic Shoulder Screw - Size: 8-32 x 3\8" – Part Number: WP780263
Single Metallic Shoulder Screw - Size: 8-32 x 3\8"
PartSelect #: PS11744747
Manufacturer #: WP780263
Sold Individually.
$7.06
  In Stock

Questions And Answers for 66513633100

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 66513633100

[Viewing 7 of 7]
Compactor ram gets stuck
Fixed by
these parts
Show All
Doesn’t stop at end of compacting cycle
Fixed by
these parts
Show All
Won’t start
Fixed by
these parts
Show All
Drawer is hard to open and or close
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Light not working
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Beware the "two screws, five minutes" repair stories!
Needed a replacement actuator for KitchenAid trash compactor model KUCS03FTSS0. The part that broke is a small metal flange held in place by two screws. PartSelect.com clearly shows this part in the online exploded view of Container Parts. When I received the replacement order in the mail, I was surprised that it was not what I thought I had ordered (a single replacement piece), but a new, *completely redesigned* actuator kit. For this model (and perhaps for other models) this new kit requires much more extensive work than just replacing two screws. Repair entailed removing the trash compactor from its installation position, removing the recess cover and machine front, disconnecting and removing the old actuator switch, drilling holes in the machine front, attaching the new actuator assembly, and disconnecting and reattaching the foot pedal. Not an overly burdensome or complicated repair, but I had been fooled by the expectation of it being a five-minute job! (Submitted on 7/2/2011 by Scott - Ventura, CA)
Parts Used:
Off-Switch Actuator Kit
  • Scott from Ventura, CA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
163 of 169 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compactor stuck in lower position
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.
Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Parts Used:
Powerscrew Cap Drive Gear Kit Washer BEARING
  • Asbjorn from The Woodlands, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
65 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trash Compactor ram wouldn't lower
I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Parts Used:
Directional Switch
  • Scott from Indianapolis, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
37 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!