Models
>
660
660 - Overview
Models starting with 660
Click on the best match to narrow your results.
- 660 ( 590-660-100 ) Cub CadetLawn Tractor Accessories (60-In Tiller)
- 660 BolensLawn Tractor (Lawn Tractor)
- 660 MTDLawn Tractor (Lawn Tractor)
- 660-031 (1988) MTDChipper Shredder (Chipper)
- 660-122 (1988) MTDChipper Shredder (Chipper)
- 660-122 (1987) MTDChipper Shredder (Chipper)
- 660-122 (1985) MTDChipper Shredder (Chipper)
- 660-24 TecumsehEngine (2-Cycle Engine)
- 660-362 (1985) MTDChipper Shredder (Chipper)
- 660-688 BolensLawn Tractor (Thru 688 Lawn Tractor)
- 6600 ThermadorFood Waste Disposer (Garbage Disposal)
- 66000T ( 323000001 - 323999999 ) ToroLeaf Blower / Vacuum (Revolution 60v Backpack)
- 66001 ( U02800001001-U02800999999 ) ShindaiwaTrimmer (Multi-Tool System Multi-Tool AttachmentsTrimmer Attachment)
- 66002 ( U02900001001-U02900999999 ) ShindaiwaLawn Tractor Accessories (Multi-Tool System Multi-Tool AttachmentsPole Pruner Attachment)
- 66003 ( U03000001001-U03000999999 ) ShindaiwaHedge Trimmer (Articulating Hedge Trimmer Attachment)
- 66004 ( U03100001001-U03100999999 ) ShindaiwaBrush Cutter (Multi-Tool System Multi-Tool AttachmentsBrushcutter Attachment)
- 66005 ( U03200001001-U03200999999 ) ShindaiwaHedge Trimmer (Mid-Reach Articulating Hedge Trimmer Attachment)
- 66006 ( U03300001001-U03300999999 ) ShindaiwaHedge Trimmer (Multi-Tool System Multi-Tool AttachmentsHedge Trimmer Attachment)
- 66010 ( U03500001001-U03500999999 ) ShindaiwaEdger (Multi-Tool System Multi-Tool AttachmentsEdger Attachment)
- 66011 ( U03600001001-U03600999999 ) ShindaiwaPower Broom (Multi-Tool System Multi-Tool AttachmentsPowerbroom Attachment)
- 66022 ( CWHESEA ) LGRange (Oven-Range)
- 66022 LGMicrowave (LG Microwave Model 66022 Parts)
- 66029 LGMicrowave (LG Microwave Model 66029 Parts)
- 66050439 General ElectricDryer
- 66058439 General ElectricDryer
- 66092 LGMicrowave (LG Microwave Model 66092 Parts)
- 66092 ( CWHESEA ) LGRange (Oven-Range)
- 660EX TitanSprayer (Airless Sprayer)
Exact Part matches for your search term
[Viewing 3 of 3]
DISCONTINUED
This part number matches the current model number 660
PartSelect #: PS111655
Manufacturer #: 660
No Longer Available
Screw
This part number matches the current model number 660
PartSelect #: PS16992465
Manufacturer #: 660
No Longer Available
KIT
This part number matches the current model number 660
PartSelect #: PS17179209
Manufacturer #: 660
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Rear Drum Bearing Kit
PartSelect #: PS267529
Manufacturer #: WE25M40
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. This part helps keep yo...
$88.17
In Stock
Drive Belt
PartSelect #: PS2350043
Manufacturer #: WE12X10014
This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.
$31.89
In Stock
Idler Pulley Wheel
PartSelect #: PS265721
Manufacturer #: WE12X83
A dryer's idler pulley wheel serves to help the belt to rotate the drum.
$34.79
In Stock
Lint Filter with Frame
PartSelect #: PS266250
Manufacturer #: WE18X26
The lint filter and frame for your dryer traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint filter is cracked or clogged, or the dryer takes too long to dry...
No Longer Available
Door Latch
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$11.38
In Stock
Micro Switch
PartSelect #: PS3522738
Manufacturer #: 3B73362F
This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximatel...
$11.28
On Order
Micro Switch
PartSelect #: PS3598700
Manufacturer #: 6600W1K001R
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or cl...
$8.67
In Stock
Adjustable Leveling Screw
PartSelect #: PS1021358
Manufacturer #: WE1M642
The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...
$16.51
In Stock
Front Drum Slide Kit
PartSelect #: PS267600
Manufacturer #: WE25X60
This front drum slide kit comes with two slides with the apppropriate mounting hardware.
No Longer Available
Switch,Micro
PartSelect #: PS3529294
Manufacturer #: 6600W1K001D
The door switch, often referred to as a primary interlock switch, provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is...
$11.28
In Stock
Heater 2-Coil Restring Kit - 240V
PartSelect #: PS265621
Manufacturer #: WE11X260
This restring coil kit is used to replace the existing coil in a dryer's heating element.
No Longer Available
Motor, AC Synchronous
PartSelect #: PS3529208
Manufacturer #: 6549W1S011B
This AC synchronous motor is a genuine OEM replacement part specially made for microwaves. It operates on an alternating current, and it is responsible for rotating the turntable to ensure even heatin...
$29.38
In Stock
Common Symptoms of models starting with 660
[Viewing 7 of 7]Noisy
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
No heat
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the rear drum bearing was worn the dryer became very noisy
i removed the scews just above thr opened dryer door, i was then able to swing the dryer top cover back. i then removed the lower front panel screws ,the the screws securing the front of the dryer ( where the door is ) and removed it. there are just 2 wires to disconnect. after the front is removed you gain full access for drum removal, r
... Read more
emove the belt make sure the wires are not in the way and remove the drum.i also used a vacuume to clean the inside of the dryer. the front drum slides are very easy to replace only 2 screws each.remove old parts install new parts then just put the dryer back together in the reverse order i took it apart. after re-assembly i turned the dryer on it was so quiet running my wife and dogs were very happy. ps. i just want to thank the people at partselect for having all my parts in stock and for the speed in which i received them. other than having to repair my dryer it was a very pleasant experiance.
Read less
Parts Used:
-
Michael from Warwick, RI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
233 of 271 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer belt broke
first I took the dryer apart 1st thing i did was unplug the power supply (safety first) then I removed the top of the unit then removed the front cleaned all the lint from the inside of the cabinet I found the proper belt size on part select.com the next day I had my dryer belt delivered (which cost 1/3 the price of the local repair shop
... Read more
price)
then I placed the belt over the dryer drum and made sure it was in the general location it should be I then replaced the front cover and the top. then I removed the rear cover which was held on by six 5/16 sheet metal screws which gave me access to the drive pulley and belt tensioner the belt goes on by going under the tensioner then around the drive pulley
Then i rotated the drum by hand to make sure everything had clearance I then buttend everything up plugged it and started it up it workd fine and I figure Ill get another 8 years out of it
Thank you partselect.com
then I placed the belt over the dryer drum and made sure it was in the general location it should be I then replaced the front cover and the top. then I removed the rear cover which was held on by six 5/16 sheet metal screws which gave me access to the drive pulley and belt tensioner the belt goes on by going under the tensioner then around the drive pulley
Then i rotated the drum by hand to make sure everything had clearance I then buttend everything up plugged it and started it up it workd fine and I figure Ill get another 8 years out of it
Thank you partselect.com
Read less
Parts Used:
-
Matt from La Belle, MO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
160 of 188 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
belt broken, pulley worn out
Removed 4 screws from top of control panel , remove 2 from back to lossen top of dryer. Removed rear lower access cover,6 screws on back of dryer exposing pulley and tensioner, remove broken belt and vaccuumed out a ton of lint , removed pulley and tensioner and replaced. From the front remove 4 screws and take off front of dryer, disconn
... Read more
ecting several wires, again vaccumed out lint, lifter drum evough to replace belt. Reassembled
Read less
Parts Used:
-
Anthony from Mpls, MN
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Socket set
68 of 102 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!