62942979 Kenmore Cooktop - Overview
Models starting with 62942979
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Surface Burner Switch
PartSelect #: PS12070671
Manufacturer #: W11088181
This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the su...
$77.68
In Stock
Dual Radiant Element with Limiter
PartSelect #: PS11759488
Manufacturer #: W10823709
The Dual Radiant Surface Element with Limiter is an essential OEM replacement part for ranges, designed to provide consistent heat to the cooking surface. This element features a dual radiant design, ...
$145.38
In Stock
6 Inch Element with Limiter
PartSelect #: PS11764912
Manufacturer #: W10823704
This element can be used for the left front or right rear.
$137.75
In Stock
Surface Element
PartSelect #: PS11759487
Manufacturer #: W10823707
This Whirlpool surface element, known as ELMNT-SURF, is specifically designed for the smoothtop range. This 8" element comes with a built-in overheat limit switch, ensuring that it delivers heat safel...
$142.32
In Stock
Air Inlet Grill
PartSelect #: PS2077285
Manufacturer #: 71001673
This part is located over top of the blower in the center of the stove top.
No Longer Available
Range Screw 632 X 5/16
PartSelect #: PS11744050
Manufacturer #: WP74004005
This screw is well under an inch long, and is made of metal.
$7.47
In Stock
Screw
PartSelect #: PS2076840
Manufacturer #: 707407
This screw is sold individually.
$12.85
Special Order
Screw
PartSelect #: PS11742467
Manufacturer #: WP4381696
This band screw is sold individually.
No Longer Available
Blower Motor
PartSelect #: PS2077161
Manufacturer #: 71001304
Used with down-draft models. This part helps draw the steam and odors through the vent when the fan switch is activated.
No Longer Available
Common Symptoms of models starting with 62942979
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Outer Ring of Dual Radiant Burner Does Not Come On
Undid two screws on underside of cook top, lifted and exposed underside. Transferred wires from the faulty burner to the new burner, one at a time, paying close attention to their respective position on the wiring posts/terminals. Undid two screws holding old burner and then mounted the new burner to underside of cook top. Was really simp
... Read more
le to do. :)
Read less
Parts Used:
-
Christopher from Fredericksburg, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
43 of 61 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old switch had shorted and burned out
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have
... Read more
been oveer $1000. Psrt was under $40 and delivered in a matter of days.
Read less
Parts Used:
-
Larry from Hampton Cove, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
37 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced heating element on flat surface stove top
I removed 4 screws and then lifted up the top it gave me access to the element I followed the direction that came with the element (very clear to follow) removed and installed the new element and it worked fine. Remember to unplug the stove if it is electric this is not in the instructions.
Parts Used:
-
dennis from assonet, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
35 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!