600RDM2-954056631 (1996-01) Jonsered Lawn Mower - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dull blade
Disconnected spark plug wire laid lawn mower in side removed blade bolt took off old blade put new blade on tightened it reconnected spark plug wire
Parts Used:
![](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9011577-1-S-Husqvarna-532145106-20-amp-34-Blade.jpg "20" Blade – Part Number: 532145106")
-
Robin from BIRCH RUN, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Parts Used:
-
Joel from ROSEVILLE, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!