580750 - Instructions

This is a simple direct replacement: unscrewed the side screws attaching the old panels and frame in place. Replace with the new pieces. Time to install new parts and put the unit in the window was about 15 minutes. Most of the time was finding my screw driver.

Local authorized LG repair shop told me, don't waste my time fixing it. Bench fix is $300 dollars. Purchased part, watched a video and bam. Fixed in 3-4 hours.

I followed an on line schematic of my unit to find the correct part number and location of the part in the unit.

Unscrewed old panels, screwed in new panels...beautiful new panels, screws, foam...unit looks like new

No repair. Just a new remote controller assembly and it works fine.

Took front cover off air conditioner and pulled it a little forward out of the outdoor housing. I then flipped the LED display section out to the left and exposed the patch panel. The next step was to remove the panel with a small screwdriver and disconnect the old thermistor plug. I then plugged in the new one, remove the old one from the grid bracket and placed the new one in. I then replaced everything else in reverse order. I have two LG air conditioners and they both have the same connection setup.

very tight working situations. made a mistake with a delicate piece of the fan and broke it and that rendered the part unuseful. Since I broke it I considered it to be my fault and just threw it away. Ordered another from another company hoping that just maybe it would be more durable. It arrived in only 4 days. Yours took well over a week to arrive. Thanks for asking for my experience.

Remove the front cover. Slide the unit forward a few inches from the case. Remove 1 screw from the top on the control box. Unsnap the old thermister leads going into the circuit board. Snap in the new thermister and place the end in the plastic holder in front of the coils. Install front cover.

simple just snaped to ends together