58070 - Overview
Models starting with 58070
Click on the best match to narrow your results.
- 58070 (3000001-3999999 - 1983) Toro Tiller (Tiller)
- 58070 Dynabrade Sander Polisher (Self Generated Dynabug "T"Model Orbital Sander)
- 58070 (3000001 - 3999999) Toro Tiller (26-Inch Tiller)
- 58070 (5000000-5999999) Toro Tiller (58070/Serial: 5000000-5999999)
- 58070074000 Kenmore Air Conditioner (AIR CONDITIONER)
- 58070122000 Kenmore Air Conditioner (AIR CONDITIONER)
- 58070188000 Kenmore Air Conditioner (ROOM AIR CONDITIONER)
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Spark Plug
PartSelect #: PS9140427
Manufacturer #: 796112S
This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air...
$6.40
In Stock
Grommet
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$6.40
In Stock
Grommet
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube.
The part is made of rubber and ...
$6.40
In Stock
Diaphragm-carburetor
PartSelect #: PS8937201
Manufacturer #: 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and ...
No Longer Available
Screw
PartSelect #: PS9942372
Manufacturer #: 321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
$6.40
In Stock
Fan Assembly,Axial
PartSelect #: PS3528606
Manufacturer #: 5900AR1173A
The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air ...
No Longer Available
Room Air Conditioner Installation Kit
PartSelect #: PS7784777
Manufacturer #: 3127A20074Y
The installation kit contains the hardware you need to install the room air conditioner.
$60.51
In Stock
Fan Assembly,Axial
PartSelect #: PS3528610
Manufacturer #: 5900AR1508B
This fan assembly or also known as a condenser fan blade is used in air conditioners. The blade fits onto the motor shaft and distributes air over the condenser to cool the refrigerant before it goes ...
No Longer Available
Gasket-fuel Tank
PartSelect #: PS8943841
Manufacturer #: 272409S
This fuel tank gasket is an OEM part certified by the manufacturer, and it provides a seal on the gas tank and carburetor of your machine.
This fuel tank gasket is gray in color and made of composit...
$6.40
In Stock
Common Symptoms of models starting with 58070
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
-
Thomas from ALFRED, ME
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
16 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace fuel diaphragm, fuel pickup tube and air cleaner
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Parts Used:
-
Gerald from MAULDIN, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan had stripped out and was replacing.
very tight working situations. made a mistake with a delicate piece of the fan and broke it and that rendered the part unuseful. Since I broke it I considered it to be my fault and just threw it away. Ordered another from another company hoping that just maybe it would be more durable. It arrived in only 4 days. Yours took well over
... Read more
a week to arrive. Thanks for asking for my experience.
Read less
Parts Used:
-
Douglas from ENGLEWOOD, TN
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
1 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!