Models > 555M > Instructions

555M Simplicity Snow Blower - Instructions

All Instructions for the 555M

replace worn PLASTIC discharge chute linkage gears

start with chute auger and punch out roll pins and cotter pin, reassemble linkage with METAL universal gears

Parts Used:

Gear Universal

James from PLAISTOW, NH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set

7 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper

Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassembled, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.

Parts Used:

Engine Carburetor Overhaul Kit

Dana from HAMMOND, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set

7 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Installed new scrapper blade

Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks

Parts Used:

SCRAPER BLADE, 20-INCH

Larry from ULYSSES, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dishwasher control panel cracked when opening the dishwasher door

First I watched the Parts Select video (Dishwasher Control Panel (Part #00475255 - How to replace) on YouTube just to be sure I could do the replacement. I ordered the part (delivered next day) and replaced the control panel in less than 30 minutes while watching the video. One note, you should be prepared to have a small stool or box to set the electrical components on while swapping the buttons on the control panel. I did not want to leave them hanging by the wires and this is not shown on the video.

Parts Used: