Models
>
5521BBC
5521BBC Husqvarna Lawn Mower - Overview
Models starting with 5521BBC
Click on the best match to narrow your results.
- 5521BBC (5521 BBC 96145000202 -2005-06) Husqvarna Lawn Mower (Lawn Mower)
- 5521BBC (5521 BBC 96145000201 -2005-07) Husqvarna Lawn Mower (Lawn Mower)
- 5521BBC (5521 BBC 96145000200 -2005-05) Husqvarna Lawn Mower (Lawn Mower)
- 5521BBC (5521 BBC 96143001300 -2006-02) Husqvarna Lawn Mower (Lawn Mower)
- 5521BBC ( 96143001303 2007-11 ) Husqvarna Lawn Mower (5521 Bbc 96143001303, 2007-11)
- 5521BBC ( 9614300303 2007-11 ) Husqvarna Lawn Mower (5521 Bbc, 9614300303, 2007-11)
- 5521BBC ( 96143001300 2005-11 ) Husqvarna Lawn Mower (5521 Bbc - 96143001300 (2005-11))
- 5521BBC ( 2007-11 ) Husqvarna Lawn Mower (5521 Bbc (2007-11))
Keep searches simple, eg. "belt" or "pump".
Cover, Dust, Wheel
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
In Stock
Bolt, Handle
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
In Stock
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...
No Longer Available
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
In Stock
Nut, Hex, Flangelock
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$4.99
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear drive wheels bald, no traction
9/16s inch socket, something to prop up one side of the mower (I used a plastic plant pot), and about 5 minutes was all that was needed. Undo the nut on the wheel, remove, replace it with the new one (can't mess it up - just goes on one way which is extremely obvious), replace and tighten the nut -- done. Just that simple. With the new
... Read more
kicks it goes up hill like a champ now (instead of spinning, especially with the grass catcher attached).
Read less
Parts Used:
-
Mark from COLUMBUS, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!