500130200 Craftsman Engine - Overview
Sections of the 500130200
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Grommet
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$6.25
In Stock
Grommet
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube.
The part is made of rubber and ...
$6.25
In Stock
Diaphragm-carburetor
PartSelect #: PS8937201
Manufacturer #: 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and ...
$3.99
In Stock
Tube-pick Up
PartSelect #: PS8966338
Manufacturer #: 391813
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. T...
No Longer Available
Gasket-cylinder Head
PartSelect #: PS8941204
Manufacturer #: 272157S
The cylinder head gasket, also known just as the head gasket, is an OEM part sold individually. Grey in color, the head gasket provides a seal between the cylinder head and the engine block in your en...
$8.30
On Order
Armature-magneto
PartSelect #: PS9278124
Manufacturer #: 397358
This magneto, also known as an ignition coil, is a genuine OEM replacement part for outdoor power equipment. It generates the spark needed to ignite the air-fuel mixture in the engine’s combustion cha...
$61.15
In Stock
Deflector-muffler
PartSelect #: PS9138598
Manufacturer #: 796956
This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during ...
$15.40
In Stock
Gasket-intake
PartSelect #: PS8941014
Manufacturer #: 27355S
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburet...
$6.25
In Stock
Gasket-crkcse/015
PartSelect #: PS9063744
Manufacturer #: 692213
The Crankcase Gasket (.015) is a manufacturer-certified part which is rated as being "Medium" difficulty to install. It will require a screwdriver, socket set, wrench set, and nut driver. It s used to...
$6.25
In Stock
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$6.25
In Stock
Gasket-exhaust
PartSelect #: PS9294810
Manufacturer #: 692237
The exhaust gasket attaches to the exhaust manifold and helps to form a seal. It is an authentic OEM sourced part which is specially designed for use with Briggs & Stratton generators and engines, plu...
$6.88
In Stock
Questions And Answers for 500130200
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 500130200
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
-
Thomas from ALFRED, ME
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
16 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
-
Alberto from PALMETTO BAY, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
11 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!