EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > 4KHM512TCB0 > Instructions

4KHM512TCB0 KitchenAid Mixer - Instructions

All Instructions for the 4KHM512TCB0
1 - 15 of 50
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The wire on the one beater broke so I sent for another set of beaters. The beaters that I received are alot heavier and much nicer than the ones that came with my Kitchen Aide mixer.
I put the beaters in the mixer slots and turned on the power.
Parts Used:
Mixer Beaters
  • CAROL from JERSEY SHORE, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
93 of 99 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The beaters on the small hand-held KitchenAid mixer are of such poor quality that I went ahead and ordered two pairs in anticipation of the 3rd pair (yes third pair) coming apart. So I ordered a 4th pair as insurance against the 3rd pair coming apart.
I inserted the beaters into the slots on the bottom of the mixer and we were in business.
Parts Used:
Mixer Beaters
  • James from Beebe, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
20 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hand mixer beater was broken
Basicly all I did was order new mixer beaters for my hand mixer. I live in the south central part of Nebraska on a farm. We are not close to any large towns, so I really appreciate finding the beaters online. The cost of a new hand mixer would be many times more than what I had to give for the parts.
Parts Used:
Mixer Beaters
  • Claudia from Bertrand, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost one of my beaters.
Been mixing my cookie dough with one beater for a year. Rather than replacing/buying a whole new mixer I FINALLY googled the model number and "parts." Brilliant!! Now I have two beaters again and a back up for a lot less money than buying a whole new mixer and LESS wasteful. Thanks!
Parts Used:
Mixer Beaters
  • Connie from Englewood, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One broken beater
Bought a new pair.
Parts Used:
Mixer Beaters
  • June from Dunwoody, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Beater Stem separated
Replaced with new beaters.
Parts Used:
Mixer Beaters
  • Bob from Lafayette, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wires on the beater broke.
Popped the new beaters in the holes and they fit perfect. No problem
Parts Used:
Mixer Beaters
  • Christine from West Lafayette, IN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I lost the beaters to my mixer!
Obviously, easy. But thanks for showing me what to buy and getting them to me promptly
Parts Used:
Mixer Beaters
  • Kathryn from Berea, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Meeded new beaters
All that was necessary was to install the two beaters into the housing section of the beater.Now the handmixer works perfectly.
Parts Used:
Mixer Beaters
  • DOLORES from LA MIRADA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one of the beaters broke
ordered the replacement pair. Looks are identical, however, the new set makes alot of noise.
Parts Used:
Mixer Beaters
  • Dana from Red Wing, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of my beaters broke
I plugged the new beater into the mixer.
Parts Used:
Mixer Beaters
  • Brenda from Lancaster, WI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken beater in KitchenAid food mixer
Simply installed the NEW beaters! Everything then worked fine.
Parts Used:
Mixer Beaters
  • Michael from BEND, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Beaters thrown away by ex-friend and thief
Received the beaters. Opened package and removed plastic. Snapped beaters into place!! Easy as that. It's too bad that KitchenAid doesn't offer much as far as attachments go. I love my mixer. I am not able to afford the BIG stand mixer so...If I wanted to continue using my mixer, I had to buy another set of beaters. I do have to say that the beaters I bought from PartSelect were of superior quality than the original beaters. Well worth it to buy another pair from PartSelect!! Thank you PartSelect!!
Parts Used:
Mixer Beaters
  • Colleen from Sultan, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the 4 blades on a beater snapped at the top end.
I put the replacement beaters in the designated sockets exactly as indicated in the bottom of the mixer body. Essentially the same as every other time I have used this mixer.
Parts Used:
Mixer Beaters
  • Janine from DYERSVILLE, IA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer beater broke
No repairs only replaced
Parts Used:
Mixer Beaters
  • Terry from HARRISBURG, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 4KHM512TCB0
1 - 15 of 50