4KFP710WH1 KitchenAid Food Processor - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replacement bowl for Kitchenaid 7 cup food processor
Replaced broken bowl. The locking mechanism is not sturdy on the original and breaks in the bowl handle. If this replacement lasts, I will be happy because I really like the processor.
Parts Used:
-
Paula from Sarasita, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
146 of 156 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bowl of food processor needed replacing
-
Sonia from Alamogordo, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
30 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The handle on our bowl had broken at the latch
This bowl fit perfectly and was a much cheaper alternative to buying a new Kitchenaide food processor. No assembly simply switch the bowls out.
Parts Used:
-
Tobin from ROBINS, IA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
16 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic pin meant to insert into the processor when the bowl is snapped in place
(and thus enables the machine to process food), was not springing into its intended orifice. I tried to repair my original bowl but couldn't. For $18 I was able to save my favorite kitchen appliance. Thank you! Just had to swap the broken work bowl for the new one I ordered from your establishment. No disassembly required. Incredibly easy.
Parts Used:
-
Simone from ABERDEEN, ID
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Work bowl lever broke.
-
Donna from UNIVERSITY PL, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken latch on old bowl
-
Robert from LIVERMORE, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke the bowl of the food procressor and needed a new one
Just took the old one out and put this one in. It was perfect. Just like the one that the food processor came with.
Parts Used:
-
Linda from BROADVIEW HTS, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken bowl
-
Linda from OCEAN SPRINGS, MS
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke
i hate the handle. it is evil. but i love the machine itself,so... major problem: I wanted red but the red was 47 and the white was 17...i went with white
Parts Used:
-
Heather from Tucker, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Original work bowl broke
-
Jordan from Peachtree City, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
original bowl broke to pieces at handle
-
Qian from Oakland, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Work bowel broke
-
Thomas from Rapid City, SD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The locking mechanism on the work bowl broke while shredding cheese. This is the second time in 3 years that this part had to be replaced.
Easy enough to order and quick delivery, even with holiday shipping. Possible design flaw?
Parts Used:
-
Janice from Arlington, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Food processor didn't operate when food processor plugged in and on button pressed.
No repair needed, a part on original work bowl must have broken, so bowl wouldn't lock properly to base and processor wouldn't operate. Replacement bowl fixed the problem right away. Thank you!
Parts Used:
-
NANCY from LAKE IN THE HILLS, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The handle of the original bowl was broken.
No repair....just a new bowl. Very pleased though with this company....fast delivery and half the price of going through Kitchen Aid.
Parts Used:
-
Linda from Orlando, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!