440 Troy-Bilt Lawn Mower - Overview
Sections of the 440
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
WHEEL-GEAR 8-INCH INTE
PartSelect #: PS19272260
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside whic...
$30.12
On Order
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an an...
$34.74
In Stock
Lawn Mower Drive Belt
PartSelect #: PS9186153
Manufacturer #: 954-0637A
This walk-behind mower drive belt transfers power from the engine pulley to the transmission, allowing the self-propelled front wheels to move the mower forward. Replacing a worn or stretched belt hel...
$18.22
In Stock
Nut-Wing 1/4-20
PartSelect #: PS16410014
Manufacturer #: 712-0397A
This is an authentic OEM supplied replacement part that is specially designed for use with walk-behind lawn mowers. In conjunction with a bolt which is sold separately, this part is generally used to ...
No Longer Available
Rear Trail Shield
PartSelect #: PS16415413
Manufacturer #: 731-04998
This is a genuine item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It is an identical replacement for a missing or damaged rear trail shield that was ...
No Longer Available
COVER-TRANS-FWD 21
PartSelect #: PS19303155
Manufacturer #: 931-05020A
The front drive cover attaches to the main body and is made of plastic. It is a genuine OEM sourced part which is specially designed for use with Troy-Bilt lawn mower. This item is available as an ind...
$92.23
Special Order
Wheel Assembly (Front)
PartSelect #: PS12683001
Manufacturer #: 753-08175
Wheel Assembly-Hub Cap needs to be removed to install wheel.
$61.66
Special Order
Wave Wash. 1-In. I.D. X 1.5-In.
PartSelect #: PS9410987
Manufacturer #: 736-0447
This is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from MTD, Ryobi, and Troy-Bilt. The metal wave washer is used to provide cushioning b...
$6.40
In Stock
Exact Part matches for your search term
[Viewing 2 of 2]
Gear Cover
This part number matches the current model number 440
PartSelect #: PS16602466
Manufacturer #: 440
No Longer Available
COUPLING SET, QUICK-.125 FLOW
This part number matches the current model number 440
PartSelect #: PS19046990
Manufacturer #: 440
$350.91
Special Order
Common Symptoms of the 440
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
-
Jay from GERRY, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
-
Ronald from WAYNE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Parts Used:
-
MICHAEL from Kennewick, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!