Models > 41794130000

41794130000 Kenmore Dryer - Overview

Sections of the 41794130000

[Viewing 6 of 6]

Manuals & Care Guides for 41794130000

Click to download
Keep searches simple, eg. "belt" or "pump".
M Series Ignition Coil Kit – Part Number: 5303931775
M Series Ignition Coil Kit
★★★★★
★★★★★
(24)
PartSelect #: PS470049
Manufacturer #: 5303931775
This kit contains two coils, one is a two-wire secondary coil and the other is a three-wire booster coil. Both coils in the ignition coil kit should be used together in the clothes dryer. Some of the ...
$35.04
  In Stock
Order within the next 6 hrs and your part ships today!
Adjustable Leveling Foot - Black – Part Number: 216396900
Adjustable Leveling Foot - Black
PartSelect #: PS425733
Manufacturer #: 216396900
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling...
$25.68
  In Stock
Order within the next 6 hrs and your part ships today!
Lint Filter – Part Number: 134793600
Lint Filter
★★★★★
★★★★★
(20)
PartSelect #: PS2349312
Manufacturer #: 134793600
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 inches long x 11 inche...
$73.76
  On Order
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$24.35
  In Stock
Order within the next 6 hrs and your part ships today!
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$25.42
  In Stock
Order within the next 6 hrs and your part ships today!
Flame Sensor – Part Number: 5303281135
Flame Sensor
★★★★★
★★★★★
(4)
PartSelect #: PS459818
Manufacturer #: 5303281135
This part senses the flame for heat allowing the gas valve to open. The most common issue that might arise that would indicate the flame sensor needs to be replaced is your dryer is not giving off eno...
$63.04
  In Stock
Order within the next 6 hrs and your part ships today!
High Temperature Adhesive – Part Number: 5308027429
High Temperature Adhesive
PartSelect #: PS474458
Manufacturer #: 5308027429
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before apply...
$52.32
  In Stock
Order within the next 6 hrs and your part ships today!
ROLLER KIT – Part Number: 5304523155
ROLLER KIT
PartSelect #: PS12746506
Manufacturer #: 5304523155
This is a genuine replacement drum roller for a dryer. This part includes a roller which has an axle and two tri-rings. The dryer drum roller holds the drum in place while it rotates on the dryer supp...
$57.82
  Special Order
Thermal Fuse – Part Number: 137539200
Thermal Fuse
★★★★★
★★★★★
(5)
PartSelect #: PS7783961
Manufacturer #: 137539200
$34.61
  In Stock
Order within the next 6 hrs and your part ships today!
Moisture Sensor – Part Number: 134786100
Moisture Sensor
★★★★★
★★★★★
(2)
PartSelect #: PS2349303
Manufacturer #: 134786100
$67.22
  In Stock
Order within the next 6 hrs and your part ships today!
Belt – Part Number: 134719300
Belt
★★★★★
★★★★★
(3)
PartSelect #: PS2349294
Manufacturer #: 134719300
$55.37
  In Stock
Order within the next 6 hrs and your part ships today!
Thermal Fuse – Part Number: 134711401
Thermal Fuse
★★★★★
★★★★★
(3)
PartSelect #: PS4704883
Manufacturer #: 134711401
$30.67
  In Stock
Order within the next 6 hrs and your part ships today!

Questions And Answers for 41794130000

Be the first to ask our experts a question about this model!

Common Symptoms of the 41794130000

[Viewing 8 of 8]
No heat or not enough heat
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Ice maker not making ice
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer would heat initially then cool down
The top of the dryer was easily removed by prying the front up with a screwdriver then tipping it back and off of the mounting brackets. Then the front of the dryer was removed by unscrewing a single screw on each side that held the front to the side panels then pulling the front away from the dryer. Once the front was off, the coils were easily accessible on the bottom left side. A metal bracket held the coils on and was somewhat tough to get the two screws removed on it as they were stuck, but once they were removed the coils easily came out and I was able to replace them in minutes. The whole job took 15-20 minutes and I now have a dryer that heats through the entire drying cycle.
Parts Used:
M Series Ignition Coil Kit
  • Brett from Monticello, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
90 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would heat only on the initial start. Burner would not light again until completely cooled down. The ignitor would energize, but no gas would flow for ignition.
1. Pry Dryer top up and off the clips. (Front of Dryer)
2. Remove 2 phillips screws on the inside of front panel.
3. Lift front panel up and set off to the side
4. Removed 2 phillips screws with short handled phillips driver that hold the gas valve coil bracket in place.
5. Unplugged and removed both coils, installed new coils and bracket. Re installed front panel, screws and top.
Parts Used:
M Series Ignition Coil Kit
  • Bruce from Burnsville, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
40 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat, but everything else works. Ran continuity tests on everything and found gas valve solenoid coils open.
Just as others described in your forum, getting to the gas valve solenoid coils is relatively easy. Pop the top lid and lay it back, remove 2 inside screws that fasten the front cover and pull back off the snap clips and lift up and off. Remove 3 screws that hold the entire gas control assembly to the bottom of the dryer and remove. Unfasten 2 screws on the valve that lock the plate on top of the two coils, unplug the electrical spade lug connections and remove. Install the new coils and do everything in reverse. Easy as 1-2-3.
Parts Used:
M Series Ignition Coil Kit
  • Barry from Fremont, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
27 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!