Models > 41784132000

41784132000 Kenmore Dryer - Overview

Sections of the 41784132000

[Viewing 6 of 6]

Manuals & Care Guides for 41784132000

Click to download
Keep searches simple, eg. "belt" or "pump".
High Limit Thermostat – Part Number: 3204267
High Limit Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS446428
Manufacturer #: 3204267
This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and only c...
$85.14
  In Stock
Order within the next 5 hrs and your part ships today!
Dryer Heater Element – Part Number: 134792700
Dryer Heater Element
★★★★★
★★★★★
(11)
PartSelect #: PS2349309
Manufacturer #: 134792700
This part is a heater, but may also be known as a heating element, and it is meant for your dryer. This is where the heat is generated during your machine cycle in order to properly dry your clothing....
$200.92
  In Stock
Order within the next 5 hrs and your part ships today!
Adjustable Leveling Foot - Black – Part Number: 216396900
Adjustable Leveling Foot - Black
PartSelect #: PS425733
Manufacturer #: 216396900
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling...
$25.68
  In Stock
Order within the next 5 hrs and your part ships today!
Lint Filter – Part Number: 134793600
Lint Filter
★★★★★
★★★★★
(20)
PartSelect #: PS2349312
Manufacturer #: 134793600
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 inches long x 11 inche...
$73.76
  On Order
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$24.35
  In Stock
Order within the next 5 hrs and your part ships today!
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$25.42
  In Stock
Order within the next 5 hrs and your part ships today!
High Temperature Adhesive – Part Number: 5308027429
High Temperature Adhesive
PartSelect #: PS474458
Manufacturer #: 5308027429
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before apply...
$52.32
  In Stock
Order within the next 5 hrs and your part ships today!
Thermal Fuse – Part Number: 137032600
Thermal Fuse
★★★★★
★★★★★
(2)
PartSelect #: PS2349395
Manufacturer #: 137032600
$46.23
  In Stock
Order within the next 5 hrs and your part ships today!
ROLLER KIT – Part Number: 5304523155
ROLLER KIT
PartSelect #: PS12746506
Manufacturer #: 5304523155
This is a genuine replacement drum roller for a dryer. This part includes a roller which has an axle and two tri-rings. The dryer drum roller holds the drum in place while it rotates on the dryer supp...
$57.82
  Special Order
Moisture Sensor – Part Number: 134786100
Moisture Sensor
★★★★★
★★★★★
(2)
PartSelect #: PS2349303
Manufacturer #: 134786100
$67.22
  In Stock
Order within the next 5 hrs and your part ships today!
Belt – Part Number: 134719300
Belt
★★★★★
★★★★★
(3)
PartSelect #: PS2349294
Manufacturer #: 134719300
$55.37
  In Stock
Order within the next 5 hrs and your part ships today!
Thermal Fuse – Part Number: 134711401
Thermal Fuse
★★★★★
★★★★★
(3)
PartSelect #: PS4704883
Manufacturer #: 134711401
$30.67
  In Stock
Order within the next 5 hrs and your part ships today!

Questions And Answers for 41784132000

Be the first to ask our experts a question about this model!

Common Symptoms of the 41784132000

[Viewing 10 of 10]
No heat or not enough heat
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Ice maker not making ice
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noisy Dryer
When I described the noise to a YouTube appliance diagnostician, I was directed to check the felt seals front and back of the rotating drum for wear, tears, or foreign objects. As it happens the felt seals looked find and there were foreign objects so, not wanting to disassemble and reassemble the dryer more than I had, I ended up replacing all the replaceable moving parts that I considered possible culprits: The idler tension spring, the idler tension bracket (which includes a nylon pulley wheel), the drum belt, the five rubber-tipped bearings that support the drum and keep it in place, and the foam seal on the blower housing which seemed a little brittle and old, as well as high-temperature adhesive for the latter. The instructional videos here and on YouTube were extremely helpful (I doubt that I would have attempted this job at all, had I not watched these ahead of time). The most time-consuming aspect was waiting for the arrival of the parts as I didn't order them all at the same time or all from the same place (I ordered from whomever could ship me a given part the fastest. Disassembly took less than an hour. Re-assembly with the new parts in place took about the same but was a little more awkward because this appliance sits in a very narrow closet and it's difficult to ensure that the 4" flexible duct stays in place when sliding the appliance back into the closet. No regrets. Now I know the basics if this dryer needs attention in future and I also know all the parts that I can eliminate as suspects in any future maintenance (the parts that I replaced)
Parts Used:
Belt ROLLER KIT
  • Philip from Oakland, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
25 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wasn't heating properly, drying took too long.
Removed back of dryer with electric nut driver. Lots of screws. Removed old heating element to better access wires and thermostats. Removed baffle at end and transferred to new heater element. Transferred thermostats to new element, reconnected wiring in correct order. Installed new heater element in correct position using tab to locate. Replaced back of dryer. Reconnected dryer vent. Toughest part was squeezing out of space after reconnecting dryer vent. Unfortunately, too short for my weight.
Parts Used:
Dryer Heater Element
  • Steven from MARIETTA, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Repair
The ice maker wouldn't fill with water. The maker itself appeared to operate but the tray would not fill. I ordered the part from PartSelect.com. The website allowed me to conveniently match a picture of the part with my part on the refrig. I ordered the part and it arrived in two days. I was impressed!

I turned the water to the ice maker off, unplugged the refrig. and pulled it out from the wall. I loosened and removed two screws with a nut-driver and unplug the wiring connection from the old part by simply pulling on it with my fingers. I then unscrewed the water connection from the old part using a set of pliers. The old part was then discarded. I connected the water and electrical and remounted the new part using the two screws. It was too easy!
Parts Used:
Water Valve with Bracket
  • Kristi from Winfield, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!