400 Shindaiwa Chainsaw - Overview
Sections of the 400
[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Fuel Filter Assy.
PartSelect #: PS16478678
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$11.70
In Stock
Washer 5
PartSelect #: PS9308885
Manufacturer #: 90060300005
This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing b...
$6.06
In Stock
Clip
PartSelect #: PS9238696
Manufacturer #: V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a l...
$6.40
In Stock
Trimmer Hex Bolt
PartSelect #: PS9151013
Manufacturer #: 90010505012
This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications.
Th...
$6.40
In Stock
Gasket, Cap
PartSelect #: PS9237389
Manufacturer #: V106000080
This is a genuine manufacturer sourced replacement part that is specially designed for use with Shindaiwa chainsaws. It is used to provide an air-tight seal for the gas cap. Over time gasket material ...
$6.40
In Stock
Adjusting Stud
PartSelect #: PS10043357
Manufacturer #: C309000110
This item is available as an individual replacement part. The adjusting stud attaches to the guide plate and is made of metal. A screwdriver may be helpful when replacing this part. This item may beco...
$6.40
In Stock
Spring Washer 8
PartSelect #: PS9308890
Manufacturer #: 90060500008
The OEM M8 Lock Washer (Spring Washer 8) is an 8mm silver, metal part. It can be installed with a wrench set and socket set. It prevents bolts or nuts from loosening. If broken, the bolt or nut it is ...
$6.40
In Stock
Strainer
PartSelect #: PS9261206
Manufacturer #: 12312610631
This is an original replacement part manufactured for use with outdoor power equipment. The strainer is used with many different types of equipment and is commonly used in the carburetor fuel system. ...
$6.40
Special Order
Chainsaw Fuel Pump Gasket
PartSelect #: PS8855073
Manufacturer #: 12312512330
This authentic item is supplied by the original equipment manufacturer for use with Echo and Shindaiwa chainsaws. The gasket is utilized to provide a tight seal for the fuel pump, unfortunately, over ...
$6.40
In Stock
Exact Part matches for your search term
[Viewing 3 of 3]
Water heater thermostat
This part number matches the current model number 400
PartSelect #: PS12192351
Manufacturer #: 400
No Longer Available
Panel hardware
This part number matches the current model number 400
PartSelect #: PS16987321
Manufacturer #: 400
No Longer Available
RV9YC SM ENG SPARK PLUG
This part number matches the current model number 400
PartSelect #: PS18558230
Manufacturer #: 400
$6.40
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!