32001SSST Snapper Snow Blower - Overview
Models starting with 32001SSST
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Wing Knob
PartSelect #: PS9999469
Manufacturer #: 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down th...
$10.50
In Stock
GUIDE, CHUTE RING
PartSelect #: PS18603943
Manufacturer #: 7014915YP
This is a genuine Snapper replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The plastic retainer is used to fasten the chute to the auger housing asse...
$9.75
In Stock
Lawn Mower Cotter Pin
PartSelect #: PS9999599
Manufacturer #: 703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, ...
$6.25
Special Order
Nut, #10-24 Hex Flange Lock
PartSelect #: PS16404093
Manufacturer #: 703917
This is an OEM part for a variety of machines. The purpose of this Flange or Lock Nut is to hold parts in place while resisting loosening. It is made of metal, is not part of a kit or assembly, is sol...
$6.25
In Stock
Screw, Self Tapping
PartSelect #: PS9084841
Manufacturer #: 7091075SM
It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches t...
$6.25
In Stock
Clamp-hose
PartSelect #: PS9140678
Manufacturer #: 791850
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Kee...
$6.25
In Stock
SCRAPER BLADE, 20-INCH
PartSelect #: PS18604976
Manufacturer #: 7028427YP
This item has been sourced from the original manufacturer and is intended to be used with snowthrowers from Snapper. This scraper blade attaches to the bottom of the auger housing. This item is used t...
$44.39
In Stock
CABLE, AUGER DRIVE
PartSelect #: PS18604253
Manufacturer #: 7018796YP
This item is available as an individual replacement part. The clutch cable is made of metal and plastic and helps with the auger assembly. If this item becomes stretched or broken it will need to be r...
$43.55
Special Order
Kit, Rubber Blade Replacement
PartSelect #: PS10000801
Manufacturer #: 7060631YP
This is available as a set that contains four blades and two shoes. A socket set may be required to replace these parts if they become broken. They attach to the auger assembly and are made out of rub...
$164.98
Special Order
Washer, 5/16
PartSelect #: PS9999626
Manufacturer #: 703350
This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment...
$6.25
On Order
BOLT, #10-24 x 1/2" Flat Head Square Neck, YZ
PartSelect #: PS9298377
Manufacturer #: 7091085YP
Designed to fit inside the lock nut so both parts can be tightened, this Flat Head Carriage Bolt is not part of a kit or assembly and is sold individually. It is approximately 1/2 an inch long, made o...
$6.25
In Stock
Lawn Mower Bushing
PartSelect #: PS9295838
Manufacturer #: 7014343YP
This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment....
$6.25
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old auger broke
-
John from COLUMBUS, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed new scrapper blade
Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks
Parts Used:
-
Larry from ULYSSES, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blower chute kept falling off
Ordered the plastic chute retainer parts. 3 required. Remove screws from chute to retainer 6 total. Replace chute and hold retainer clip under chute and replace screws. Do not over tighten only made of plastic. Make sure to spray some wd 40 on rim so it moves smoothly. If it doesnt loosen screws a little. Works perfect.
Parts Used:
-
Michael from FAIRMONT, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!