Models > 2X

2X - Overview

Models starting with 2X

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Shear Pin, .25 – Part Number: 738-04124A
Shear Pin, .25
PartSelect #: PS9110822
Manufacturer #: 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the...
$3.99
  In Stock
Bow Tie Cotter Pin – Part Number: 714-04040
Bow Tie Cotter Pin
PartSelect #: PS9096195
Manufacturer #: 714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a k...
$3.99
  In Stock
Chute Flange Keeper – Part Number: 731-04869A
Chute Flange Keeper
PartSelect #: PS9104771
Manufacturer #: 731-04869A
The chute flange keeper is a genuine OEM replacement part that secures the chute flange on snowblowers. The keeper is made of plastic and fits onto the metal piece, known as the flange, that connects ...
$4.99
  In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Speed Selector Cable – Part Number: 946-04396A
Speed Selector Cable
PartSelect #: PS9166871
Manufacturer #: 946-04396A
This speed selector cable is sourced from the original manufacturer and consists of a cable enclosed in an outer protective casing. It connects the control panel to the transmission/drive system of th...
$19.72
  In Stock
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
  In Stock
Self-Tapping Screw, 5/16-18, .750 – Part Number: 710-04484
Self-Tapping Screw, 5/16-18, .750
PartSelect #: PS9086265
Manufacturer #: 710-04484
$3.99
  In Stock
Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451
Carriage Bolt, 5/16-18 x .75
PartSelect #: PS10001568
Manufacturer #: 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into pla...
$3.99
  In Stock
Nut, Flange Lock, 3/8-16, Grf – Part Number: 712-04065
Nut, Flange Lock, 3/8-16, Grf
PartSelect #: PS9095080
Manufacturer #: 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also...
$3.99
  In Stock
Drive Clutch Cable 39.88 – Part Number: 946-0898
Drive Clutch Cable 39.88
PartSelect #: PS9170572
Manufacturer #: 946-0898
$26.74
  In Stock
Chute Flange Keeper – Part Number: 731-0851A
Chute Flange Keeper
★★★★★
★★★★★
(1)
PartSelect #: PS10005747
Manufacturer #: 731-0851A
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the c...
$4.99
  In Stock
Fuel Bowl O-Ring – Part Number: 951-11589A
Fuel Bowl O-Ring
PartSelect #: PS17016670
Manufacturer #: 951-11589A
Fuel Bowl O-Ring
$6.60
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The chute rotation assembly was stuck
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part. They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Parts Used:
Chute Rotation Gearbox
  • Ralph from SALT LAKE CTY, UT
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Carburetor rebuild
I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- jtandree@gmail.com
Parts Used:
Carburetor Gasket Plate
  • Jason from PEABODY, MA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!