Models
>
284-
284- - Overview
Models starting with 284-
Click on the best match to narrow your results.
- 284-132 ( 1985 ) MTD Lawn Mower (Lawn Mower)
- 284-157 ( 1985 ) MTD Lawn Mower (Lawn Mower)
- 284-192 ( 1985 ) MTD Lawn Mower (Lawn Mower)
- 284-2 (Ryan 909075157-009153201) Ryobi Trimmer (Trimmer)
- 284-240 ( 116-412A134 1996 ) MTD Lawn Mower (Walk-Behind Mower)
- 284-240 ( 116-412A129 1996 ) MTD Lawn Mower (Walk-Behind Mower)
- 284-240 MTD Lawn Mower (MTD Lawn Mower Model 284-240 (284240, 284 240) Parts)
- 284-3 (Ryan 009153201-101052250) Ryobi Trimmer (Trimmer)
- 284-305 ( 1985 ) MTD Lawn Mower (Lawn Mower)
Keep searches simple, eg. "belt" or "pump".
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
In Stock
Fuel Line and Filter
PartSelect #: PS10014709
Manufacturer #: 791-682039
This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak...
$15.94
In Stock
Bump Head Knob Assembly
PartSelect #: PS9306452
Manufacturer #: 791-153066B
This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this...
$13.64
In Stock
Primer and Hose Assembly
PartSelect #: PS10014772
Manufacturer #: 791-683974B
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear an...
$21.79
In Stock
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
In Stock
Spark Plug
PartSelect #: PS10014637
Manufacturer #: 791-610311B
This Spark Plug is inserted into the cylinder head and is rated as "Easy" to install. The spark plug ignites the air fuel mixture inside the combustion chamber. If the part doesn't work, or is missing...
$14.46
In Stock
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
In Stock
Throttle Control Wire 55"
PartSelect #: PS9311802
Manufacturer #: 946-0671A
This Throttle Control Wire is a 55-inch black Throttle Cable, made of metal with a rubberized casing. It's rated as "Easy" to install, attaching from the throttle control to the carburetor, and requir...
$14.31
In Stock
Common Symptoms of models starting with 284-
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
-
David from PITTSBURGH, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!