24A-07MM066 Troy-Bilt Chipper Shredder - Overview
Models starting with 24A-07MM066
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
WHEEL-GEAR 8-INCH INTE
PartSelect #: PS19272260
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside whic...
$30.12
On Order
Nut-flglk 5/16-18
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$6.40
In Stock
KIT- WHL IDLE 8 X
PartSelect #: PS19283939
Manufacturer #: 753-08091
8 x 2.125
This wheel is for lawn mowers.
Wear work gloves to protect your hands when installing this part.
$66.47
Special Order
KIT-WHEEL DRIVE 8
PartSelect #: PS19283937
Manufacturer #: 753-08087
This wheel kit is a genuine manufacturer sourced replacement part. It is specially designed for use with walk-behind lawn mowers. This is the drive wheel that moves the mower. This part consists of a ...
$63.87
Special Order
Chipper Blade
PartSelect #: PS16474135
Manufacturer #: 981-0490
The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened ...
$43.45
Special Order
Nut-Wing 1/4-20
PartSelect #: PS16410014
Manufacturer #: 712-0397A
This is an authentic OEM supplied replacement part that is specially designed for use with walk-behind lawn mowers. In conjunction with a bolt which is sold separately, this part is generally used to ...
No Longer Available
Fuel Filter
PartSelect #: PS17016264
Manufacturer #: 951-12296A
This genuine OEM replacement fuel filter is specifically designed for use with gas-powered lawn and garden equipment. Its primary function is to ensure that fuel delivered to the engine is clean and f...
$15.56
In Stock
DOOR-NOZZLE
PartSelect #: PS19271252
Manufacturer #: 731-2294A
The nozzle door attaches to the nozzle and is made of plastic. This item is available as an individual replacement part. During replacement, it may require a screwdriver to help install this item corr...
$61.22
Special Order
BAG-CSV W/TROY-BIL
PartSelect #: PS19253112
Manufacturer #: 664-04029
It is an authentic OEM replacement part which is acquired directly from the original parts manufacturer for a Troy-Bilt Chipper/Shredder Vac. This Bag is used to hold wood shavings that are collected ...
$292.93
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
-
Jay from GERRY, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
-
Ronald from WAYNE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Parts Used:
-
MICHAEL from Kennewick, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!