Models > 2263692

2263692 LG - Overview

Models starting with 2263692

Keep searches simple, eg. "belt" or "pump".
Micro Switch – Part Number: 3B73362F
Micro Switch
★★★★★
★★★★★
(12)
PartSelect #: PS3522738
Manufacturer #: 3B73362F
This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximatel...
$11.28
  On Order
Glass Cooking Tray – Part Number: 1B71961H
Glass Cooking Tray
★★★★★
★★★★★
(10)
PartSelect #: PS3517413
Manufacturer #: 1B71961H
This OEM glass cooking tray is a removable glass plate, measuring 13 inches in diameter, that spins inside the microwave during operation. It ensures that heat is evenly distributed in the microwave t...
$37.33
  In Stock
Micro Switch – Part Number: 6600W1K001R
Micro Switch
PartSelect #: PS3598700
Manufacturer #: 6600W1K001R
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or cl...
$8.67
  In Stock
Halogen Lamp – Part Number: 6912A40002E
Halogen Lamp
PartSelect #: PS3530398
Manufacturer #: 6912A40002E
This is a halogen lamp, or light bulb, for a microwave. The microwave light should illuminate the inside of the microwave while the door is open and while the appliance is running. If the light bulb d...
$24.13
  In Stock
Fuse,Time Delay – Part Number: 3B74133Q
Fuse,Time Delay
★★★★★
★★★★★
(3)
PartSelect #: PS3522743
Manufacturer #: 3B74133Q
The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a power surge, in ord...
$7.73
  In Stock
Screw,Tapping – Part Number: 1TTL0402818
Screw,Tapping
★★★★★
★★★★★
(1)
PartSelect #: PS3517555
Manufacturer #: 1TTL0402818
$8.17
  In Stock
Magnetron – Part Number: 6324W1A001L
Magnetron
★★★★★
★★★★★
(6)
PartSelect #: PS3529034
Manufacturer #: 6324W1A001L
This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron be...
$180.80
  In Stock
Thermostat – Part Number: 6930W1A003D
Thermostat
PartSelect #: PS3530459
Manufacturer #: 6930W1A003D
$16.24
  In Stock
Capacitor,High Voltage – Part Number: 0CZZW1H004B
Capacitor,High Voltage
PartSelect #: PS3517241
Manufacturer #: 0CZZW1H004B
$30.74
  On Order
Cable,Assembly – Part Number: 6021W3B001A
Cable,Assembly
PartSelect #: PS3528792
Manufacturer #: 6021W3B001A
$21.09
  Special Order
Screw,Tapping – Part Number: 1TTL0402418
Screw,Tapping
PartSelect #: PS3517549
Manufacturer #: 1TTL0402418
$7.36
  In Stock
Holder Assembly – Part Number: 4021W3A001A
Holder Assembly
PartSelect #: PS3522818
Manufacturer #: 4021W3A001A
$8.17
  In Stock

Common Symptoms of models starting with 2263692

[Viewing 4 of 4]
No heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken door micro switch. (unit does not start heating)
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far left side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Parts Used:
Micro Switch
  • JAMES from BILLINGS, MT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
30 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broke the round glass tray
new glass tray
Parts Used:
Glass Cooking Tray
  • Eileen from DETROIT LAKES, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door sensor switch went bad. Microwave would not operate.
Watched a couple of repair videos on Youtube by searching for the model number. Found out what to do in order not to get shocked by the powerful capacitor.
Ordered the two switches (To be sure, I could have ordered a third switch as suggested in the videos.)
Bought a tamper-proof star bit to get the cover off. Followed the directions to replace the switches. - I broke the harness and had to use some super glue, but it's all good. I should have removed the harness instead of trying to get a switch out while it was still in place.
It's all back together, and the wife is happy!!
Parts Used:
Micro Switch
  • Randall from ARCADIA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
10 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!