Models
>
2248XPA
2248XPA (GTH 954567888 -2002-01) Husqvarna Lawn Tractor - Overview
Sections of the 2248XPA
[Viewing 10 of 10]_(2002-01)_WW_1.gif "Page A Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_2.gif "Page B Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_3.gif "Page C Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_4.gif "Page D Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_5.gif "Page E Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_6.gif "Page F Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_7.gif "Page G Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_8.gif "Page H Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_9.gif "Page I Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
_(2002-01)_WW_10.gif "Page J Diagram and Parts List for GTH 954567888 -2002-01 Husqvarna Lawn Tractor")
Keep searches simple, eg. "belt" or "pump".
Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.21
In Stock
Ring Klip Number T5304-75
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$3.99
In Stock
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock
Washer 25/32 x 1-1/4 x 16 Ga.
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
In Stock
Cap Axle Black 1 50 x 1 00
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.99
In Stock
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
$8.71
In Stock
Blade High Lift
PartSelect #: PS9015048
Manufacturer #: 532180054
This is an OEM replacement part, sold individually.
The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging t...
$17.43
In Stock
Clip, Hairpin
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$3.99
In Stock
Questions And Answers for 2248XPA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Parts Used:
-
Anthony from OLIVEHILL, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c
... Read more
ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Parts Used:
-
Steven from Hickory, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench set
4 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front wheels, too much end play
-
Frederick from BINGHAMTON, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
7 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!