22005 Toro Lawn Mower - Overview
Models starting with 22005
Click on the best match to narrow your results.
- 22005 ( 4000001-4999999 1984 ) Toro Lawn Mower (Lawnmower)
- 22005 ( 5000001-5999999 1985 ) Toro Lawn Mower (Lawnmower)
- 22005 ( 6000001-6999999 1986 ) Toro Lawn Mower (Lawnmower)
- 22005 ( 7000001-7999999 1987 ) Toro Lawn Mower (Lawnmower)
- 22005 ( 8000001-8999999 1988 ) Toro Lawn Mower (Lawnmower)
- 22005 ( 9000001-9999999 1989 ) Toro Lawn Mower (Lawnmower)
- 22005 (9000001 - 9999999) Toro Lawn Mower (Lawnmower)
- 22005 (5000001 - 5999999) Toro Lawn Mower (Lawnmower)
- 22005 (6000001 - 6999999) Toro Lawn Mower (Lawnmower)
- 22005 (7000001 - 7999999) Toro Lawn Mower (Lawnmower)
- 22005 (4000001 - 4999999) Toro Lawn Mower (Lawnmower)
- 22005 (8000001 - 8999999) Toro Lawn Mower (Lawnmower)
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS9942372
Manufacturer #: 321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
$6.40
In Stock
Nut-lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$6.40
In Stock
Tube-pick Up
PartSelect #: PS8966338
Manufacturer #: 391813
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. T...
No Longer Available
Armature-magneto
PartSelect #: PS9278124
Manufacturer #: 397358
This magneto, also known as an ignition coil, is a genuine OEM replacement part for outdoor power equipment. It generates the spark needed to ignite the air-fuel mixture in the engine’s combustion cha...
$62.60
In Stock
Seal-oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$7.47
In Stock
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$6.40
In Stock
Gasket-exhaust
PartSelect #: PS9294810
Manufacturer #: 692237
The exhaust gasket attaches to the exhaust manifold and helps to form a seal. It is an authentic OEM sourced part which is specially designed for use with Briggs & Stratton generators and engines, plu...
$7.04
In Stock
Nut-lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$6.40
In Stock
Filter-pre Cleaner
PartSelect #: PS8937831
Manufacturer #: 271466
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
$6.40
In Stock
Nut-lock, Ni
PartSelect #: PS8953375
Manufacturer #: 3296-56
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
$6.40
In Stock
Muffler
PartSelect #: PS9281342
Manufacturer #: 494585
This is a genuine replacement part manufactured for use with small engines. The muffler assembly is complete including the adapters, the gasket, and mounting hardware. The exhaust muffler is sold individually.
$27.98
In Stock
Common Symptoms of models starting with 22005
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
-
Thomas from ALFRED, ME
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
16 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
-
Alberto from PALMETTO BAY, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
11 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!