21AE663E06665HP (2007) Troy-Bilt Tiller - Overview
Sections of the 21AE663E06665HP
[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Nut-flglk 5/16-18
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$6.40
In Stock
SEAL-OIL
PartSelect #: PS19301951
Manufacturer #: 921-04035
This is a genuine OEM sourced item that is specially produced for Troy-Bilt and MTD roto-tillers. The purpose of this component is to provide a tight seal which will prevent oil from leaking. It is an...
$16.77
On Order
PULLEY-IDLER
PartSelect #: PS19285514
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
$50.96
On Order
WASHER-KEY HANDLE
PartSelect #: PS19273165
Manufacturer #: 736-04445
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD lawn and garden equipment. This is a special component that is utilized to provid...
$6.40
Special Order
KNOB-CONTROL
PartSelect #: PS19321467
Manufacturer #: GW-9119
This is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The knob attaches to the end of the depth regulator bar and is used to pro...
$18.30
Special Order
TINE-BOLO 12-INCH LH
PartSelect #: PS19274414
Manufacturer #: 742-04223-0637
This is a genuine manufacturer-sourced component which is specially made for use with Troy-Bilt tillers. It is an identical replacement for a missing or a faulty bolo tine that was installed on a new ...
$38.69
In Stock
Lock Nut
PartSelect #: PS16410294
Manufacturer #: 712-3004A
This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part...
$6.40
On Order
SEAL-OIL
PartSelect #: PS19301950
Manufacturer #: 921-04034
This is a genuine OEM sourced hardware that is specially made for MTD and Troy-Bilt tillers. It is utilized to provide a tight seal on the eccentric shaft, unfortunately, over time it will wear out an...
$14.39
Special Order
CABLE-CLUTCH
PartSelect #: PS19304911
Manufacturer #: 946-04027
This is a genuine manufacturer-sourced part which is designed for use with MTD and Troy-Bilt lawn and garden equipment. The clutch cable engages the deck. It is an identical replacement for a faulty o...
$53.51
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!