21A-630B063 (2002) Troy-Bilt Tiller - Overview
Sections of the 21A-630B063
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
TINE-BOLO 10-INCH LH
PartSelect #: PS19274426
Manufacturer #: 742-04227-0637
This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to in...
$26.62
Special Order
Belt-v Rev Drv 3
PartSelect #: PS10035469
Manufacturer #: 954-04091
The Reverse Drive Belt is a 13 x 3/8 inch is a black rubber belt which attaches to the transmission and engine drive pulleys. This belt allows you to drive the unit backwards. If it's broken due to fa...
$27.09
In Stock
TINE-BOLO 10-INCH RH
PartSelect #: PS19274422
Manufacturer #: 742-04226-0637
The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its i...
$26.62
On Order
Washer-lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$6.57
In Stock
PULLEY-IDLER
PartSelect #: PS19285514
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
$50.96
On Order
HKY PART
PartSelect #: PS19264534
Manufacturer #: 710-04163
This replacement screw is an authentic component which is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD lawn and garden equipment. It is a standard hardware...
No Longer Available
Lock Nut
PartSelect #: PS16410294
Manufacturer #: 712-3004A
This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part...
$6.40
On Order
BELT-V FWD DRV 3
PartSelect #: PS19308030
Manufacturer #: 954-04089
This forward drive belt is an authentic Troy-Bilt part manufactured for use with tillers. This rubberized belt is driven by the engine drive pulley, and connects to the transmission pulley to move the...
$36.60
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!