EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

21770 - Overview

Models starting with 21770

Keep searches simple, eg. "belt" or "pump".
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$6.40
  In Stock
Order now and your part arrives by Apr 6
Engine Oil Seal – Part Number: 795387
Engine Oil Seal
★★★★★
★★★★★
(2)
PartSelect #: PS9151828
Manufacturer #: 795387
This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty...
$9.69
  In Stock
Order now and your part arrives by Apr 6
Plug-spark – Part Number: 491055S
Plug-spark
★★★★★
★★★★★
(2)
PartSelect #: PS9281094
Manufacturer #: 491055S
$6.40
  In Stock
Order now and your part arrives by Apr 6
Gasket-rocker Cover – Part Number: 272475S
Gasket-rocker Cover
PartSelect #: PS8941245
Manufacturer #: 272475S
This OEM Gasket Rocker Cover, which can also be called the Valve Cover Gasket, is used to provide a seal between the valve cover and engine. This is a gray-colored part, measuring 5 1/2 x 4 Inch, and ...
$6.48
  In Stock
Order now and your part arrives by Apr 6
Engine Oil Seal – Part Number: 391086S
Engine Oil Seal
★★★★★
★★★★★
(1)
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$8.09
  In Stock
Order now and your part arrives by Apr 6
Gasket-exhaust – Part Number: 692236
Gasket-exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$6.47
  In Stock
Order now and your part arrives by Apr 6
Tube-breather – Part Number: 794683
Tube-breather
PartSelect #: PS9306838
Manufacturer #: 794683
This item is an authentic OEM replacement part that is intended to be used with small engines from Briggs & Stratton. The breather tube is used to guide the direction of excess gasses and fluid that e...
$13.02
  In Stock
Order now and your part arrives by Apr 6
Filter Fuel Mega Pack – Part Number: 394358B
Filter Fuel Mega Pack
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$6.40
  In Stock
Order now and your part arrives by Apr 6
Seal-o Ring – Part Number: 691917
Seal-o Ring
★★★★★
★★★★★
(1)
PartSelect #: PS9294749
Manufacturer #: 691917
The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and ma...
$6.40
  In Stock
Order now and your part arrives by Apr 6
Key-flywheel – Part Number: 222698S
Key-flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$6.40
  In Stock
Order now and your part arrives by Apr 6
Gasket-crkcse/015 – Part Number: 697110
Gasket-crkcse/015
PartSelect #: PS9076878
Manufacturer #: 697110
Genuine OEM replacement part used on a variety of Engines. This item is made with Composite Material and it is sold individually. Its purpose is to make an air tight seal so that no air/oil leakage oc...
$9.69
  In Stock
Order now and your part arrives by Apr 6
Gasket-float Bowl – Part Number: 281165S
Gasket-float Bowl
★★★★★
★★★★★
(1)
PartSelect #: PS8945656
Manufacturer #: 281165S
This is a Genuine OEM replacement part used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recomm...
$6.40
  In Stock
Order now and your part arrives by Apr 6

Exact Part matches for your search term

[Viewing 1 of 1]
ND257-001, MOTOR SPACING SHIM- – Part Number: 21770
ND257-001, MOTOR SPACING SHIM-
This part number matches the current model number 21770
PartSelect #: PS19069051
Manufacturer #: 21770
$6.40
  Special Order

Common Symptoms of models starting with 21770

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Screw can out of the carburator throttle baffel and stuck in the exhaust valve
No compression. Removed the cylinder head. freed the screw, checked the valve to see if it still sealed. Turned the head over with the valves in it, install a spark plug, fill the head dome with gas and see if any leeks out over a 2 hr period. If not you are good to go. Reinstalled every thing with new gaskets and a new carburetor screw. Set the valves to spec. Complete the rebuild and there you have it. Rebuild the carburetor while you have it apart. This motor runs great !!!
Parts Used:
Washer-sealing Gasket-exhaust Gasket-intake Seal-o Ring Gasket-cylinder Head Seal-o Ring Screw Seal-o Ring Gasket-float Bowl Gasket-rocker Cover
  • FRANK from EASTANOLLEE, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench set
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stopped running. Turned to be a bent intake push rod and broken rocker arm
Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC

Added oil and gas. Now running great

If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Parts Used:
Arm-rocker Guide-push Rod
  • Rene from COVINGTON, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Socket set, Wrench set
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
trailing shield had broken off the mower, rendering bag useless.
Removed the wheels, attached the shield and replace wheels. Easy-peesy!
Parts Used:
Trailing Shield
  • Judy from PRINCETON, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!