21693 Toro Lawn Mower - Overview
Models starting with 21693
Click on the best match to narrow your results.
- 21693 (414500000 - 999999999) Toro Lawn Mower (53cm Super Recycler Lawn Mower)
- 21693 (400000000 - 410999999) Toro Lawn Mower (53cm Super Recycler Lawn Mower)
- 21693 (413000000 - 414499999) Toro Lawn Mower (53cm Super Recycler Lawn Mower)
- 21693 (411000000 - 412999999) Toro Lawn Mower (53cm Super Recycler Lawn Mower)
Keep searches simple, eg. "belt" or "pump".
Stepped Washer
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$6.40
In Stock
Ring-retaining
PartSelect #: PS8950132
Manufacturer #: 32151-61
For all your repair needs, look no further than this Genuine Toro Ring-Retaining. Perfect for various equipment repair tasks, this Toro OEM part epitomizes robustness and durability. Crafted to the hi...
$6.40
In Stock
Gear-pinion, 15t
PartSelect #: PS11804780
Manufacturer #: 131-5399
This item has been OEM sourced an is intended to be used with walk-behind lawnmowers from Toro and Lawn Boy. The metal pinion gear attaches the mower\\\'s transaxle and is used to interconnect with th...
$7.34
In Stock
Lawn Mower Drive Belt
PartSelect #: PS8844898
Manufacturer #: 115-4669
Wheel drive belt. Width: 3/8 inch Length: 33 1/4 inch
$15.92
$24.67
In Stock
Bolt-blade
PartSelect #: PS9885938
Manufacturer #: 125-2466
This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which i...
$6.40
In Stock
Cable Guide
PartSelect #: PS8845311
Manufacturer #: 114-7988
This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the contro...
$6.40
In Stock
Screw-hwhtf
PartSelect #: PS8985055
Manufacturer #: 49-2040
This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This scr...
$6.40
In Stock
Bushing-sleeve
PartSelect #: PS8833696
Manufacturer #: 108-9782
This authentic item is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn and garden equipment. It is an identical replacement for a missing or a faulty bus...
$6.40
In Stock
Retainer-bushing, Hoc
PartSelect #: PS8832093
Manufacturer #: 108-9779
It is a genuine item that is supplied by the original equipment manufacturer for use with Lawn Boy and Toro lawn and garden equipment. This is a special hardware that helps to secure the bushing. It p...
$19.94
In Stock
Knob-handle
PartSelect #: PS8851479
Manufacturer #: 117-5976
This item is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Toro and Lawn Boy. The handle locking knob is used with a bolt to secure th...
$6.40
In Stock
Exact Part matches for your search term
[Viewing 2 of 2]
Steer Bracket
This part number matches the current model number 21693
PartSelect #: PS10203304
Manufacturer #: 21693
No Longer Available
Pinion Gear 1600/3600
This part number matches the current model number 21693
PartSelect #: PS18275948
Manufacturer #: 21693
$14.30
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Parts Used:
-
Ray from YARDLEY, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench set
5 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!