Models > 2148A

2148A (YTH 954571960 -2003-11) Husqvarna Lawn Tractor - Overview

Sections of the 2148A

[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.81
  In Stock
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.81
  In Stock
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
$8.91
  In Stock
Blade High Lift – Part Number: 532180054
Blade High Lift
PartSelect #: PS9015048
Manufacturer #: 532180054
This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging t...
$16.56
  In Stock
Bearing-Ball-Mandrel – Part Number: 532110485
Bearing-Ball-Mandrel
★★★★★
★★★★★
(1)
PartSelect #: PS9285698
Manufacturer #: 532110485
$11.46
  In Stock
Washer-Spacer – Part Number: 532187690
Washer-Spacer
PartSelect #: PS9286886
Manufacturer #: 532187690
$3.81
  In Stock
Bolt-Shoulder – Part Number: 532193406
Bolt-Shoulder
PartSelect #: PS9016060
Manufacturer #: 532193406
  No Longer Available
Clip, Hairpin – Part Number: 532003146
Clip, Hairpin
PartSelect #: PS9007536
Manufacturer #: 532003146
$3.81
  In Stock
Screw – Part Number: 532137729
Screw
PartSelect #: PS9009676
Manufacturer #: 532137729
$5.09
  In Stock
E-Ring Number 5133-75 – Part Number: 812000001
E-Ring Number 5133-75
★★★★★
★★★★★
(1)
PartSelect #: PS9155405
Manufacturer #: 812000001
E Ring Number 5133-75 is a black, metal ring for securing the position of other parts. If damaged it will become loose or fall off. Installation is rated as "Easy" and is done with a pair of pliers. R...
$5.09
  In Stock
Nut-Push – Part Number: 532110452
Nut-Push
PartSelect #: PS9285696
Manufacturer #: 532110452
The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold ...
$3.81
  In Stock
Nut Lock 5/16-18 – Part Number: 873800500
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...   No Longer Available

Questions And Answers for 2148A

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut came off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Parts Used:
Pulley
  • Steven from Hickory, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken v-belt for drive
I returned the belt because it was the wrong part. Ordered the correct belt from another source. After that the replacement went well and I crossed off Parts Select from my list.
Parts Used:
V-Belt, Ground Drive
  • Paul from ROCKTON, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Parts Used:
Washer 25/32 x 1-1/4 x 16 Ga.
  • Frederick from BINGHAMTON, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!