20332 Toro Lawn Mower Parts & Repair Help | PartSelect
Models > 20332 (312000001 - 312999999)

20332 (312000001 - 312999999) Toro Lawn Mower - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(1)
PartSelect #:PS9048394
Manufacturer #:614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part s...
$2.99
In Stock
PartSelect #:PS8845729
Manufacturer #:114-7963-01
$25.88
In Stock
(1)
PartSelect #:PS9180925
Manufacturer #:95-1726
$2.99
In Stock
PartSelect #:PS8847392
Manufacturer #:115-8447
$11.98
In Stock
PartSelect #:PS8824569
Manufacturer #:104-8699
$3.47
In Stock
PartSelect #:PS9046634
Manufacturer #:614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation require...
$3.47
In Stock
PartSelect #:PS9276436
Manufacturer #:3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specf...
$2.99
In Stock
(1)
PartSelect #:PS11804777
Manufacturer #:131-4547-03
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious da...
$23.19
In Stock
PartSelect #:PS8843654
Manufacturer #:114-2679-03
$46.02
In Stock
PartSelect #:PS8963619
Manufacturer #:40-1940
$2.99
In Stock
Questions and Answers for 20332
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The hub that the mower blade mounts to was broken

  • Customer: randy from HIGHLAND, IL
  • Difficulty: Very Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 1 of 1 people found this instruction helpful
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up read more

Wheel height adjuster lever (spring steel) cracked / split in two.

Arm-Spring – Part Number: 105-1809
  • Customer: Ray from YARDLEY, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set, Wrench set
  • 1 of 1 people found this instruction helpful
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Ch... read more

Torsion spring broken

Spring-Torsion – Part Number: 121-9118
  • Customer: Henry from ORLAND PARK, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 1 of 3 people found this instruction helpful
I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked read more