Models > 20331C

20331C Toro Lawn Mower - Overview

Models starting with 20331C

Keep searches simple, eg. "belt" or "pump".
Filter- A/C Cartridge – Part Number: 491588S
Filter- A/C Cartridge
★★★★★
★★★★★
(4)
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.06
  In Stock
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.99
  In Stock
Air Cleaner Gasket – Part Number: 795629
Air Cleaner Gasket
★★★★★
★★★★★
(3)
PartSelect #: PS9138757
Manufacturer #: 795629
The Air Cleaner Gasket is used to provide a seal between the air cleaner base, and carburetor. It's a gray, composite material part, which is rated as "Easy" to install and will require a screw driver...
$5.19
  In Stock
Engine Gasket Set – Part Number: 590508
Engine Gasket Set
★★★★★
★★★★★
(1)
PartSelect #: PS9036317
Manufacturer #: 590508
This genuine OEM engine gasket set is sourced directly from the manufacturer and includes the gaskets needed to seal the components in a gas-powered engine. This set ensures proper fit and performance...
$37.66
  In Stock
Carburetor – Part Number: 799866
Carburetor
PartSelect #: PS9139157
Manufacturer #: 799866
This is an authentic OEM replacement part used on lawn and garden engines. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. This Carburetor is a auto-choke system...
  No Longer Available
Washer-Stepped – Part Number: 614426
Washer-Stepped
★★★★★
★★★★★
(1)
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$3.99
  In Stock
Spring-Air Vane – Part Number: 790849
Spring-Air Vane
★★★★★
★★★★★
(1)
PartSelect #: PS9148751
Manufacturer #: 790849
$6.57
  In Stock
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.06
  In Stock
Blade-22 Inch – Part Number: 131-4547-03
Blade-22 Inch
★★★★★
★★★★★
(1)
PartSelect #: PS11804777
Manufacturer #: 131-4547-03
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. Yo...
$24.90
  In Stock
Chute-Discharge, Side – Part Number: 115-8447
Chute-Discharge, Side
★★★★★
★★★★★
(1)
PartSelect #: PS8847392
Manufacturer #: 115-8447
$18.64
  In Stock
Baffle-Front – Part Number: 114-7963-01
Baffle-Front
PartSelect #: PS8845729
Manufacturer #: 114-7963-01
$40.23
  In Stock
Rear Baffle – Part Number: 120-5218
Rear Baffle
★★★★★
★★★★★
(1)
PartSelect #: PS8856278
Manufacturer #: 120-5218
$31.00
  In Stock

Common Symptoms of models starting with 20331C

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
drive cable broke
removed the broken cable and installed the new cable,
Parts Used:
Cable-Traction
  • Donald from MARION, IA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Parts Used:
Spacer-Driver Blade Driver Assembly
  • randy from HIGHLAND, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
6 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking gaskets
All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore
Parts Used:
Engine Gasket Set
  • Dustin from BANGOR, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Socket set, Wrench set
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!