Models > 17BA5A4G709

17BA5A4G709 Cub Cadet Lawn Mower - Overview

Sections of the 17BA5A4G709

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Seal--Oil (PTO Side) – Part Number: 795387
Seal--Oil (PTO Side)
★★★★★
★★★★★
(2)
PartSelect #: PS9151828
Manufacturer #: 795387
This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty...
$7.88
  In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Gasket Set-Valve – Part Number: 794152
Gasket Set-Valve
★★★★★
★★★★★
(1)
PartSelect #: PS9141388
Manufacturer #: 794152
$31.69
  On Order
Gasket--Exhaust – Part Number: 692236
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
  In Stock
Seal-O Ring – Part Number: 691917
Seal-O Ring
★★★★★
★★★★★
(1)
PartSelect #: PS9294749
Manufacturer #: 691917
The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and ma...
$4.99
  In Stock
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
  In Stock
Tube--Breather – Part Number: 794683
Tube--Breather
PartSelect #: PS9306838
Manufacturer #: 794683
$8.01
  In Stock
Bearing – Part Number: 931-0374
Bearing
PartSelect #: PS9164778
Manufacturer #: 931-0374
The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their pos...
$7.48
  On Order
Fan-Flywheel – Part Number: 796201
Fan-Flywheel
★★★★★
★★★★★
(6)
PartSelect #: PS9306896
Manufacturer #: 796201
$29.29
  In Stock
Gasket--Crankcase (.015 Thick) – Part Number: 697110
Gasket--Crankcase (.015 Thick)
PartSelect #: PS9076878
Manufacturer #: 697110
$7.88
  In Stock
Nut, Flange Lock, 3/8-16, Grf – Part Number: 712-04065
Nut, Flange Lock, 3/8-16, Grf
PartSelect #: PS9095080
Manufacturer #: 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also...
$3.99
  In Stock
Armature-Magneto – Part Number: 591459
Armature-Magneto
★★★★★
★★★★★
(1)
PartSelect #: PS9045176
Manufacturer #: 591459
$58.83
  In Stock

Questions And Answers for 17BA5A4G709

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My Briggs & Strattan (Troy Bilt) riding mover had broken vanes(blades) on the engine.
I went to Troy-Bilt first first for the part-nothing, then B&S engine, still no help surfing their websites for this part. Again, no help. Before giving up completely I thought about all the parts I have bought from PartSelect for washers and such. Typed in "Fan-Flywheel" B&S. First thing that popped up was a picture of this part. All my searching on Troy-Bilt mower site and B&S site for over two hours with no results, and then I go to PartSelect and without my model number or anything else, they had it and even displayed my model number and sent it right away, popped it in and the mower is working fine as ever. No matter what you need, I say save yourself a lot of time and just go here first. I'm a loyal member of PartSelect for over six years!!!
Parts Used:
Fan-Flywheel
  • William from SPRING GREEN, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Parts Used:
Tube--Breather
  • Emanuel from FERRIDAY, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!