1690810 Simplicity Tiller - Overview
Sections of the 1690810
[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
Bearing, Ball 11/16x1
PartSelect #: PS8887153
Manufacturer #: 1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for...
$10.65
In Stock
Filter Fuel Mega Pack
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$6.40
In Stock
Engine Carburetor Overhaul Kit
PartSelect #: PS9306689
Manufacturer #: 792006
This OEM approved overhaul kit is designed for rebuilding/fixing carburetor on a Briggs and Stratton engine. This kit contains all the necessary gaskets, diaphragms and other parts to rebuild your car...
$34.75
In Stock
Nut, Cntr Lck, 3/8-16
PartSelect #: PS10000167
Manufacturer #: 703893
This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loo...
$9.83
In Stock
Bushing-0.765Idx
PartSelect #: PS8921376
Manufacturer #: 2176440SM
This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to...
$7.25
Special Order
Solenoid Kit
PartSelect #: PS16297127
Manufacturer #: 1686981YP
Your Samsung range is about to get a handy upgrade! Our genuine Samsung Packing Grate Assembly is not just a replacement part?it's a solution to uneven cooking and unstable pots and pans. Crafted from...
$34.36
In Stock
KEY, PLASTIC COVERED
PartSelect #: PS9265798
Manufacturer #: 1717163SM
Key-ignition indak
$13.39
In Stock
Lawn Mower E-Retainer Ring
PartSelect #: PS9934404
Manufacturer #: 2827794SM
This external retaining ring is a type of fastener used to secure components in various models of tractors. It is a genuine OEM replacement part provided by the manufacturer, also known as an E-ring o...
$6.40
In Stock
Screw, 5/16-18 X .75
PartSelect #: PS9999567
Manufacturer #: 703228
This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capsc...
$6.55
In Stock
Bushing, 3/8 X 9/16 X 5/8, Rub
PartSelect #: PS8874177
Manufacturer #: 1654930SM
This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between conne...
$11.29
Special Order
Washer, 3/8
PartSelect #: PS16404073
Manufacturer #: 703878
It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a...
$6.40
In Stock
Questions And Answers for 1690810
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Parts Used:
-
Dana from HAMMOND, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!