1687817 - Overview
Models starting with 1687817
Click on the best match to narrow your results.
- 1687817 Simplicity Snow Blower (Simplicity Snowblower Model 1687817 Parts)
- 1687817 Snapper Lawn Tractor Accessories (Snowshredder Auger Kit)
- 1687817YP Murray Auger (Snowshredder Auger Kit)
- 1687817YP Snapper Lawn Tractor Accessories (Snowshredder Auger Kit)
- 1687817YP Briggs and Stratton Snow Blower (1687817yp - Snowshredder Auger Kit)
Keep searches simple, eg. "belt" or "pump".
Kit, Scaper Bar & Flight
PartSelect #: PS10069504
Manufacturer #: 1687806
Having trouble with an unorganized and messy fridge? Can't easily find the butter or your favorite drink? Our sturdy and reliable GE Refrigerator Module Shelf FF is here to solve your problem. This ...
$142.93
On Order
Nut, 1/4-20, Nylock
PartSelect #: PS9999570
Manufacturer #: 703232
This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless ...
$6.55
In Stock
Nut, Hex Lock, 1/4-20
PartSelect #: PS8898862
Manufacturer #: 1752935YP
Nut hex lock 1/4-20
$6.40
In Stock
Screw, 1/4-20 X 5/8
PartSelect #: PS8987257
Manufacturer #: 5025299X5YP
Screw 1/4-20 x 5/8
$7.35
In Stock
Lawn Mower Screw Hex Washer Head Trilob 1/420 X 1/2
PartSelect #: PS10069522
Manufacturer #: 704130
Screw hex 1/4-20x.5
$6.40
In Stock
Retainer, Bearing
PartSelect #: PS9267481
Manufacturer #: 1739228YP
Retainer bearing
$10.75
In Stock
Auger Blade
PartSelect #: PS12621262
Manufacturer #: 1687806
Auger blade kit with scraper blade & support
$75.47
Special Order
Common Symptoms of models starting with 1687817
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scraper bar and flight worn past wear limit.
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl
... Read more
ied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Read less
Parts Used:
-
Duane from RICHFIELD, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wetn wele except having to go get a star driver to get old one off.. treplacmetn parts werre all allen wrench so went well
Star wrenched off old blades.. removed scraper with Allen's and adjustable wrench. replaced scraper first then attached the blades and tightened.. Whalla.. done ready for another foot or snow removal same day.
Parts Used:
-
John from BOUNTIFUL, UT
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!